VisionSOM-RT: Difference between revisions
From SomLabs Wiki
No edit summary |
No edit summary |
||
| Line 25: | Line 25: | ||
|content= | |content= | ||
'''Development tutorials''' | '''Development tutorials''' | ||
*[[How to enable trace feature on i.MX RT|How to enable trace feature on i.MX RT ]] | *[[How to create and run the first FreeRTOS application on the VisionSOM-RT|How to create and run the first FreeRTOS application on the VisionSOM-RT]] | ||
*[[How to enable trace feature on i.MX RT|How to enable trace feature on i.MX RT]] | |||
}} | }} | ||
}} | }} | ||
Revision as of 17:55, 17 March 2019
| VisionSOM-RT |
|
VisionSOM-RT is comprised of a small processor module with CPU bus accessibility and standard I/O functionality and is an ideal solution for embedded projects. VisionSOM-RT can often trim 8-12 months from design cycle and can be easy adapted to existing projects or can be used together with a dedicated carrier board. Customers who are looking for a complete solution can use a set comprised of System on Module (SoM) and Carrier Board (CB). VisionSOM-RT requires a matching customer’s board or a carrier board to establish a complete system. Carrier Board together with VisionSOM-RT is ready to use computer on board and is giving enormous flexibility in building projects. |
Documentation
How to
| Specifications |
| CPU | NXP i.MX RT Cortex-M7 32-bit processor (CPU clock up to 600MHz) |
| Memory | 512kB on-chip RAM, up to 32MB SDRAM |
| GPU | NXP PXP 2D graphics accelerator for LCD-TFT |
| Display | 24-bit RGB parallel interface |
| Storage | 4 or 16MB QSPI Flash |
| I2C | up to 4 channels |
| SPI | up to 4 channels |
| CAN | up to 2 FlexCAN |
| UART | up to 8 channels |
| USB | 2 x USB2.0 OTG |
| Audio | 3 x I2S/SAI, S/PDIF Tx/Rx |
| Temperature Range | -40 to +85°C |
| Dimensions | 67mm x 32mm x 4mm SODIMM200 module |
