VisionSOM-RT

VisionSOM-RT

VisionSOM-RT is comprised of a small processor module with CPU bus accessibility and standard I/O functionality and is an ideal solution for embedded projects. VisionSOM-RT can often trim 8-12 months from design cycle and can be easy adapted to existing projects or can be used together with a dedicated carrier board. Customers who are looking for a complete solution can use a set comprised of System on Module (SoM) and Carrier Board (CB). VisionSOM-RT requires a matching customer’s board or a carrier board to establish a complete system. Carrier Board together with VisionSOM-RT is ready to use computer on board and is giving enormous flexibility in building projects.

Documentation

• Datasheet and Pinout
• VisionSOM-RT - Datasheet
• Default pin configuration (MEX file)
• EM Radiation Test Precompliance Report (EMC) v1.0
• VisionSOM-RT - Altium Designer PCB/SCH library with 3D SoM and connector models v3/2020
• VisionSOM-RT - Altium Designer PCB/SCH library with 3D SoM and connector models v12/2023
• VisionSOM-RT - STEP
• I.MXRT - Fact Sheet

How to

Development tutorials

• How to create and run the first FreeRTOS application on the VisionSOM-RT
• How to create a simple HMI application using FreeRTOS and emWin library
• How to enable trace feature on i.MX RT
• Programming i.MX RT using ZL33PRG
• VisionSOM-RT HMI demo
• Programming eFUSE bits on VisionSOM-RT

Specifications

CPU	NXP i.MX RT Cortex-M7 32-bit processor (CPU clock up to 600MHz)
Memory	512kB on-chip RAM, up to 32MB SDRAM
GPU	NXP PXP 2D graphics accelerator for LCD-TFT
Display	24-bit RGB parallel interface
Storage	4 or 16MB QSPI Flash
I2C	up to 4 channels
SPI	up to 4 channels
CAN	up to 2 FlexCAN
UART	up to 8 channels
USB	2 x USB2.0 OTG
Audio	3 x I2S/SAI, S/PDIF Tx/Rx
Temperature Range	-40 to +85°C
Dimensions	67mm x 32mm x 4mm SODIMM200 module