SL-MIPI-CSI-OV5640 Datasheet and Pinout

SL-MIPI-CSI-OV5640 5Mpx camera module with MIPI-CSI interface and OV5640 video sensor Datasheet and Pinout

---

General description

SL-MIPI-CSI-OV5640 is the 5 Mpx color camera module. Module is equipped with MIPI-CSI interface and FPC30 connector therefore SL-MIPI-CSI-OV5640 module is matched to the SoMLabs carrier boards.
The SL-MIPI-CSI-OV5640 is equipped with OV5640 hi-res HD 5 Mpx CMOS video sensor. Video interface is dual lane MIPI-CSI interface and module supports electronic shutter mode: rolling shutter/frame exposure.
As a result of using advanced PMIC – SL1 – developed by SoMLabs, the SL-MIPI-CSI-OV5640 module is powered from single +3.3V line available in FPC connector.
The SL-MIPI-CSI-OV5640 is fully compatible with SoMLabs carrier boards equipped with MIPI-CSI connectors. By default SL-MIPI-CSI-OV5640 module is equipped with fish-eye (120º) lens.

Features

• Based on OV5640 CMOS video chip
• Resolution 2592 x 1944 px
• Fish-eye lens (120º)
• Output formats: 8/10-b RGB RAW
• MIPI-CSI interface (2 lanes)
• Typical frame rates:
• QSXGA (2592×1944): 15 fps
  • 1080p: 30 fps
  • 1280×960: 45 fps
  • 720p: 60 fps
  • VGA (640×480): 90 fps
  • QVGA (320×240): 120 fps
• Shutter: rolling/frame exposure
• Single rail +3.3V power supply
• Configuration via I2C
• Operating temperature -30÷+70°C
• Fully compatible with SoMLabs carrier boards equippped with MIPI-CSI interface (FPC30 connector)
• Built-in clock source
• Built-in SL1 PMIC (developed by SoMLabs)
• Connection with carrier board using FPC30 cable

Pictures

Ordering info

SL-MIPI-CSI-OV5640 - FPC 30-pin flat cable (A-A) is included.

Operating ranges

Parameter	Value	Unit	Comment
Power Supply	3.3 & 5.0	V	Powered from carrier board
Current	0.1	A	Maximum peak value
Environment temperature	-40…+85	oC	-

Electrical parameters

Signal name	Parameter	Value			Units
		Min.	Typ.	Max.
+5V	Supply Voltage	4.75	5.0	5.25	V
+3.3V	Supply Voltage	3.2	3.3	3.35	V
I5V	Supply Current (5V)	40	80	100	mA
I3.3V	Supply Current (3.3V)	1	2.2	8	mA
VIOI2C	I2C Input Voltage	0	3.3	3.6	V
VIORES/SPDIF	RES/SPDIF Input Voltage	0	3.3	3.6	V
fI2C	I2C Controller Speed	-	-	400	kHz
RINT	Interrupt Output Pull-up Resistance	-	4.7	-	kΩ
RI2C	I2C IOs Pull-up Resistance	-	4.7	-	kΩ

MIPI-DSI (input) Pinout

FPC30 connector pin	Function name	Description
1	GND	-
2	-	-
3	HPD	HPD line from HDMI (voltage translated to 3.3V)
4	+5V	Power supply (input)
5	+5V	Power supply (input)
6	+3.3V	Power supply (input)
7	+3.3V	Power supply (input)
8	GND	-
9	SPDIF-TX	SPDIF input from SBC
10	INT	Interrupt output (voltage translated to 3.3V)
11	RESET	Reset input (voltage translated to 3.3V)
12	GND	-
13	SDA	I2C SDA line (voltage translated to 3.3V)
14	SCL	I2C SCL line (voltage translated to 3.3V)
15	GND	-
16	D3n	MIPI-DSI lane 3 negative line
17	D3p	MIPI-DSI lane 3 positive line
18	GND	-
19	D2n	MIPI-DSI lane 2 negative line
20	D2p	MIPI-DSI lane 2 positive line
21	GND	-
22	D1n	MIPI-DSI lane 1 negative line
23	D1p	MIPI-DSI lane 1 positive line
24	GND	-
25	D0n	MIPI-DSI lane 0 negative line
26	D0p	MIPI-DSI lane 0 positive line
27	GND	-
28	CLKn	MIPI-DSI clock negative line
29	CLKp	MIPI-DSI clock positive line
30	GND	-

LVDS (output) Pinout

LVDS connector pin	Function name	Description
1	+5V	Power supply for external devices (max. 20 mA) Internally connected with pin 2
2	+5V	Power supply for external devices (max. 20 mA) Internally connected with pin 1
3	-	-
4	GND	-
5	GND	-
6	GND	-
7	D0n	LVDS D0n data line
8	D0p	LVDS D0p data line
9	D1n	LVDS D1n data line
10	D1p	LVDS D1p data line
11	D2n	LVDS D2n data line
12	D2p	LVDS D2p data line
13	GND	-
14	GND	-
15	CLKn	LVDS CLKn clock line
16	CLKp	LVDS CLKp clock line
17	D3n	LVDS D3n data line
18	D3p	LVDS D3p data line

HDMI (output) Pinout

HDMI connector built-in SL-MIPI-LVDS-HDMI-CNV converter has standard HDMI pinout.

Dimensions