Personal tools

SL-MIPI-CSI-OV5640 Datasheet and Pinout: Difference between revisions

From SomLabs Wiki

Jump to: navigation, search
← Older editNewer edit →
Line 133: Line 133:
| -
| -
|-
|-
| 3
| HPD
| HPD line from HDMI (voltage translated to 3.3V)
|-
| 4
| +5V
| Power supply (input)
|-
| 5
| +5V
| Power supply (input)
|-
| 6
| +3.3V
| Power supply (input)
|-
| 7
| +3.3V
| Power supply (input)
|-
| 8
| GND
| -
|-
| 9
| SPDIF-TX
| SPDIF input from SBC
|-
| 10
| INT
| Interrupt output (voltage translated to 3.3V)
|-
| 11
| RESET
| Reset input (voltage translated to 3.3V)
|-
| 12
| GND
| -
|-
| 13
| SDA
| I2C SDA line (voltage translated to 3.3V)
|-
| 14
| SCL
| I2C SCL line (voltage translated to 3.3V)
|-
| 15
| GND
| -
|-
| 16
| D3n
| MIPI-DSI lane 3 negative line
|-
| 17
| D3p
| MIPI-DSI lane 3 positive line
|-
| 18
| GND
| -
|-
| 19
| D2n
| MIPI-DSI lane 2 negative line
|-
| 20
| D2p
| MIPI-DSI lane 2 positive line
|-
| 21
| GND
| -
|-
| 22
| D1n
| MIPI-DSI lane 1 negative line
|-
| 23
| D1p
| MIPI-DSI lane 1 positive line
|-
| 24
| GND
| -
|-
| 25
| D0n
| MIPI-DSI lane 0 negative line
|-
| 26
| D0p
| MIPI-DSI lane 0 positive line
|-
| 27
| GND
| -
|-
| 28
| CLKn
| MIPI-DSI clock negative line
|-
| 29
| CLKp
| MIPI-DSI clock positive line
|-
| 30
| GND
| -
|}
|}


Revision as of 12:24, 30 April 2021

SL-MIPI-CSI-OV5640 5Mpx camera module with MIPI-CSI interface and OV5640 video sensor Datasheet and Pinout

General description


SL-MIPI-CSI-OV5640 is the 5 Mpx color camera module. Module is equipped with MIPI-CSI interface and FPC30 connector therefore SL-MIPI-CSI-OV5640 module is matched to the SoMLabs carrier boards.
The SL-MIPI-CSI-OV5640 is equipped with OV5640 hi-res HD 5 Mpx CMOS video sensor. Video interface is dual lane MIPI-CSI interface and module supports electronic shutter mode: rolling shutter/frame exposure.
As a result of using advanced PMIC – SL1 – developed by SoMLabs, the SL-MIPI-CSI-OV5640 module is powered from single +3.3V line available in FPC connector.
The SL-MIPI-CSI-OV5640 is fully compatible with SoMLabs carrier boards equipped with MIPI-CSI connectors. By default SL-MIPI-CSI-OV5640 module is equipped with fish-eye (120º) lens.

Features

  • Based on OV5640 CMOS video chip
  • Resolution 2592 x 1944 px
  • Fish-eye lens (120º)
  • Output formats: 8/10-b RGB RAW
  • MIPI-CSI interface (2 lanes)
  • Typical frame rates:
  • QSXGA (2592×1944): 15 fps
    • 1080p: 30 fps
    • 1280×960: 45 fps
    • 720p: 60 fps
    • VGA (640×480): 90 fps
    • QVGA (320×240): 120 fps
  • Shutter: rolling/frame exposure
  • Single rail +3.3V power supply
  • Configuration via I2C
  • Operating temperature -30÷+70°C
  • Fully compatible with SoMLabs carrier boards equippped with MIPI-CSI interface (FPC30 connector)
  • Built-in clock source
  • Built-in SL1 PMIC (developed by SoMLabs)
  • Connection with carrier board using FPC30 cable

Pictures





Ordering info

SL-MIPI-CSI-OV5640 - FPC 30-pin flat cable (A-A) is included.

Operating ranges

Parameter Value Unit Comment
Power Supply
3.3
V
 Powered from carrier board
Current
0.16
A
 Maximum peak value
Environment temperature
-30…+70
 oC -

Electrical parameters

Signal name Parameter Value Units
Min. Typ. Max.
+3.3V Supply Voltage 3.2 3.3 3.35 V
I3.3V Supply Current (3.3V) 1 2.2 8 mA
VIORES/SPDIF RES/SPDIF Input Voltage 0 3.3 3.6 V
fI2C I2C Controller Speed - - 400 kHz
RINT Interrupt Output Pull-up Resistance - 4.7 - kΩ
RI2C I2C IOs Pull-up Resistance - 4.7 - kΩ

MIPI-CSI (output) Pinout




FPC30 connector pin Function name Description
1 GND -
2 - -

Dimensions


Retrieved from "https://wiki.somlabs.com/index.php?title=SL-MIPI-CSI-OV5640_Datasheet_and_Pinout&oldid=2634"