Personal tools

StarSBC-6ULL Datasheet and Pinout: Difference between revisions

From SomLabs Wiki

Jump to: navigation, search
← Older editNewer edit →
Line 259: Line 259:
1. Excluding external load connected to +3.3VOUT lines.<br />
1. Excluding external load connected to +3.3VOUT lines.<br />
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.<br />
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.<br />
== SBC pinout ==
StarSOM-6ULL board-to-board connectors view (top view)<br>
[[File:StarSOM-6ULL-connectors.png]]


{| class="wikitable"  
{| class="wikitable"  
|- style="font-weight:bold; text-align:center; vertical-align:middle;"
|- style="font-weight:bold; text-align:center;"
! Connector  pin number
! style="vertical-align:middle;" | Connector  pin number
! Default function
! style="vertical-align:middle;" | Default function
! GPIO
! style="vertical-align:middle;" | GPIO
! Ball numer   BGA289
! style="vertical-align:middle;" | Ball numer BGA289
! Notes
! style="vertical-align:middle;" | Notes
! style="vertical-align:bottom; font-weight:normal; text-align:left;" |  
! style="font-weight:normal; text-align:left;" |  
! style="vertical-align:bottom; font-weight:normal; text-align:left;" |  
! style="font-weight:normal; text-align:left;" |  
|- style="text-align:center; vertical-align:middle;"
|- style="text-align:center;"
| colspan="5" | J100
| colspan="5" style="vertical-align:middle;" | J100
| style="vertical-align:bottom; text-align:left;" |  
| style="text-align:left;" |  
| style="vertical-align:bottom; text-align:left;" |  
| style="text-align:left;" |
|- style="vertical-align:middle;"
|-
| 1
| style="vertical-align:middle;" | 1
| +3,3VO
| style="vertical-align:middle;" | +3,3VO
| style="vertical-align:middle;" |  
| style="vertical-align:middle;" |
| style="vertical-align:middle;" | +3,3V  power output (max. 100 mA) - paralelly connected to pin 1 of J101
|  
|  
|  
|  
| +3,3V  power output (max. 100 mA) - paralelly connected to pin 1 of J101
|-
| style="vertical-align:bottom;" |  
| style="vertical-align:middle;" | 2
| style="vertical-align:bottom;" |  
| style="vertical-align:middle;" | +5V
|- style="vertical-align:middle;"
| style="vertical-align:middle;" |
| 2
| style="vertical-align:middle;" |
| +5V
| style="vertical-align:middle;" | External  power supply (power source) 5V - paralelly connected to pin 2 of J101
|  
|  
|  
|  
| External  power supply (power source) 5V - paralelly connected to pin 2 of J101
|-
| style="vertical-align:bottom;" |  
| style="vertical-align:middle;" | 3
| style="vertical-align:bottom;" |  
| style="vertical-align:middle;" | UART8-RXD
|- style="vertical-align:middle;"
| style="vertical-align:middle;" | ENET2_TX_EN
| 3
| style="vertical-align:middle;" | B15
| UART8-RXD
| style="vertical-align:middle;" |  
| ENET2_TX_EN
| B15
|  
|  
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 4
| GND
|  
|  
|-
| style="vertical-align:middle;" | 4
| style="vertical-align:middle;" | GND
| style="vertical-align:middle;" |
| style="vertical-align:middle;" |
| style="vertical-align:middle;" |
|  
|  
|  
|  
| style="vertical-align:bottom;" |  
|-
| style="vertical-align:bottom;" |  
| style="vertical-align:middle;" | 5
|- style="vertical-align:middle;"
| style="vertical-align:middle;" | UART8-TXD
| 5
| style="vertical-align:middle;" | ENET2_TX_DATA1
| UART8-TXD
| style="vertical-align:middle;" | A16
| ENET2_TX_DATA1
| style="vertical-align:middle;" |  
| A16
|  
|  
| style="vertical-align:bottom;" |
|  
|  
|- style="vertical-align:middle;"
|-
| 6
| style="vertical-align:middle;" | 6
| UART3-TXD
| style="vertical-align:middle;" | UART3-TXD
| UART3_TX_DATA
| style="vertical-align:middle;" | UART3_TX_DATA
| H17
| style="vertical-align:middle;" | H17
| style="vertical-align:middle;" |
|  
|  
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 7
| PWM5
| LED_DATA18
| A13
|  
|  
| style="vertical-align:bottom;" |  
|-
| style="vertical-align:bottom;" |  
| style="vertical-align:middle;" | 7
|- style="vertical-align:middle;"
| style="vertical-align:middle;" | PWM5
| 8
| style="vertical-align:middle;" | LED_DATA18
| UART3-RXD
| style="vertical-align:middle;" | A13
| UART3_RX_DATA
| style="vertical-align:middle;" |  
| H16
|  
|  
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 9
| GND
|  
|  
|-
| style="vertical-align:middle;" | 8
| style="vertical-align:middle;" | UART3-RXD
| style="vertical-align:middle;" | UART3_RX_DATA
| style="vertical-align:middle;" | H16
| style="vertical-align:middle;" |
|  
|  
|  
|  
| style="vertical-align:bottom;" |
|-
| style="vertical-align:bottom;" |
| style="vertical-align:middle;" | 9
|- style="vertical-align:middle;"
| style="vertical-align:middle;" | GND
| 10
| style="vertical-align:middle;" |  
| UART3-CTS
| style="vertical-align:middle;" |  
| UART3_CTS
| style="vertical-align:middle;" |  
| H15
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 11
| UART4-RXD
| LCD_ENABLE
| B8
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 12
| UART3-RTS
| UART3_RTS
| G14
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 13
| UART4-TXD
| LCD_CLK
| A8
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 14
| GND
|
|
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 15
| I2C4-SDA
| LCD_DATA02
| E10
| In  I2C mode external pull-up resistor is necessary (no any internal pull-up)
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 16
| I2C3-SDA
| LCD_DATA00
| B9
| In  I2C mode external pull-up resistor is necessary (no any internal pull-up)
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 17
| I2C4-SCL
| LCD_DATA03
| D10
| In  I2C mode external pull-up resistor is necessary (no any internal pull-up)
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 18
| I2C3-SCL
| LCD_DATA01
| A9
| In  I2C mode external pull-up resistor is necessary (no any internal pull-up)
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 19
| ECSPI2-MOSI
| UART5_TX_DATA
| F17
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 20
| UART7-RXD
| LCD_DATA16
| C13
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 21
| ECSPI2-MISO
| UART5_RX_DATA
| G13
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 22
| UART7-TXD
| LCD_DATA17
| B13
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 23
| ECSPI2-SCLK
| UART4_TX_DATA
| G17
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 24
| UART7-CTS
| LCD_DATA07
| D11
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 25
| ECSPI2-CS
| UART4_RX_DATA
| G16
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 26
| UART7-RTS
| LCD_DATA06
| A10
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="text-align:center; vertical-align:middle;"
| colspan="5" | J101
| style="vertical-align:bottom; text-align:left;" |
| style="vertical-align:bottom; text-align:left;" |
|- style="vertical-align:middle;"
| 1
| +3,3VO
|
|
| +3,3V  power output (max. 100 mA) - paralelly connected to pin 1 of J100
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 2
| +5V
|
|
| External  power supply (power source) 5V - paralelly connected to pin 2 of J100
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 3
| USB1-DP
|
|
| Line  connected to USB1 channel through MUX (output ENET2_RX_ER, ball D16 is USB1  connection selector).<br />    Connected to USB1-DP MPU line if ENET2_RX_ER="0" (USB1-SEL), in  another case USB1-DP MPU line is connected to MicroUSB connector (USB-OTG).
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 4
| style="vertical-align:bottom;" | GND
|
|
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 5
| USB1-DM
|
|
| Line  connected to USB1 channel through MUX (output ENET2_RX_ER, ball D16 is USB1  connection selector).<br />    Connected to USB1-DM MPU line if ENET2_RX_ER="0" (USB1-SEL), in  another case USB1-DM MPU line is connected to MicroUSB connector (USB-OTG).
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 6
| GPIO-6
| GPIO1_IO06
| K17
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 7
| GPIO3.17
| LCD_DATA12
| C12
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 8
| GPIO-7
| GPIO1_IO07
| L16
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 9
| GND
|
|
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 10
| GPIO-8
| GPIO1_IO08
| N17
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 11
| CAN1-TX
| LCD_DATA08
| B11
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 12
| GPIO-9
| GPIO1_IO09
| M15
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 13
| CAN1-RX
| LCD_DATA09
| A11
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 14
| GND
|
|
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 15
| CAN2-TX
| LCD_DATA10
| E12
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |  
|- style="vertical-align:middle;"
| 16
| GPIO3.2
| LCD_HSYNC
| D9
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |  
|- style="vertical-align:middle;"
| 17
| CAN2-RX
| LCD_DATA11
| D12
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |  
|- style="vertical-align:middle;"
| 18
| GPIO3.3
| LCD_VSYNC
| C9
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 19
| MQS-R
| LCD_DATA22
| A14
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 20
| UART2-RXD
| UART2_RX_DATA
| J16
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 21
| MQS-L
| LCD_DATA23
| B16
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 22
| UART2-TXD
| UART2_TX_DATA
| J17
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 23
| GPIO3.25
| LCD_DATA20
| C14
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 24
| UART2-CTS
| UART2_CTS
| J15
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 25
| GPIO3.26
| LCD_DATA21
| B14
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 26
| UART2-RTS
| UART2_RTS
| H14
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="text-align:center; vertical-align:middle;"
| colspan="5" | J102
| style="vertical-align:bottom; text-align:left;" |
| style="vertical-align:bottom; text-align:left;" |
|- style="vertical-align:middle;"
| 1
| UART1-TXD
| UART1_TX_DATA
| K14
| TxD  line of Linux console port (LV-TTL logic levels)
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 2
| UART1-RXD
| UART1_RX_DATA
| K16
| RxD  line of Linux console port (LV-TTL logic levels)
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| 3
| GND
|
|
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="text-align:center; vertical-align:middle;"
| colspan="5" | Another functions
| style="vertical-align:bottom; text-align:left;" |
| style="vertical-align:bottom; text-align:left;" |
|- style="vertical-align:middle;"
|
| BUZZER
| GPIO1_IO05
| M17
| Electromagnetic  speaker control output (thru NPN driver)
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| SYSLED
| ENET2_TX_CLK
| D17
| System  or user LED control output (heartbeat by default, thru NPN driver)
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| USRLED
| LCD_DATA14
| A12
| User  LED control output (thru NPN driver)
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| WDOG-B
| LCD_RESET
| E9
| Used  by system, do not modify default configuration
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| ENET-MDIO
| ENET2_RX_DATA0
| C17
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| ENET-MDC
| ENET2_RX_DATA1
| C16
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| ENET1-RST
| ENET2_RX_EN
| B17
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| ENET1-INT
| ENET2_TX_DATA0
| A15
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| USB1-SEL
| ENET2_RX_ER
| D16
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| USB1-ID
| GPIO1_IO00
| K13
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| USB1-VBUS-OC
| GPIO1_IO01
| L15
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| USB1-VBUS-EN
| GPIO1_IO04
| M16
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| USB2-VBUS-OC
| GPIO1_IO03
| L17
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
| colspan="5" |
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="text-align:center; vertical-align:middle;"
| colspan="5" | WiFi and BLE module connection
| style="vertical-align:bottom; text-align:left;" |
| style="vertical-align:bottom; text-align:left;" |
|- style="vertical-align:middle;"
|
| BT-ENABLE
| CSI_MCLK
| F5
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| WLAN-HWAKE
| CSI_PIXCLK
| E5
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| BT-HWAKE
| CSI_VSYNC
| F2
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| BT-WAKE
| CSI_HSYNC
| F3
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| BT-RXD
| CSI_DATA00
| E4
| UART5
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| BT-TXD
| CSI_DATA01
| E3
| UART5
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| BT-RTS
| CSI_DATA02
| E2
| UART5
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| BT-RTS
| CSI_DATA03
| E1
| UART5
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| BT-PCM-SYNC
| CSI_DATA04
| D4
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| BT-PCM-CLK
| CSI_DATA05
| D3
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|  
|  
| BT-PCM-OUT
| CSI_DATA06
| D2
|  
|  
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| BT-PCM-IN
| CSI_DATA07
| D1
|
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| CLK32kHz
| JTAG_CTK
| M14
| Clock  output to 1DX radio module (WiFi/BLE)
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| JTAG_MOD
| JTAG_MOD
| P15
| Permanently  connected to GND
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|- style="vertical-align:middle;"
|
| BOOT_MODE1
| BOOT_MODE1
| U10
| Permanently  connected to GND
| style="vertical-align:bottom;" |
| style="vertical-align:bottom;" |
|-
|-
| 17
| style="vertical-align:middle;" | 10
| PMIC-ON-REQ
| style="vertical-align:middle;" | UART3-CTS
|  
| style="vertical-align:middle;" | UART3_CTS
|  
| style="vertical-align:middle;" | H15
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 18
| style="vertical-align:middle;" | 11
| ON-OFF
| style="vertical-align:middle;" | UART4-RXD
| ON-OFF
| style="vertical-align:middle;" | LCD_ENABLE
| R8
| style="vertical-align:middle;" | B8
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 19
| style="vertical-align:middle;" | 12
| PMIC-STBY-REQ
| style="vertical-align:middle;" | UART3-RTS
| PMIC-STBY-REQ
| style="vertical-align:middle;" | UART3_RTS
| U9
| style="vertical-align:middle;" | G14
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 20
| style="vertical-align:middle;" | 13
| POR
| style="vertical-align:middle;" | UART4-TXD
| POR
| style="vertical-align:middle;" | LCD_CLK
| P8
| style="vertical-align:middle;" | A8
| Power-on-reset input-output
| style="vertical-align:middle;" |
|  
|  
|  
|  
|-
|-
| 21
| style="vertical-align:middle;" | 14
| VDD-3V3-SNVS
| style="vertical-align:middle;" | GND
| VDD-SNVS-IN
| style="vertical-align:middle;" |
| P12
| style="vertical-align:middle;" |
| SNVS domain power supply<br />    External 3.3V connection power supply is necessary
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 22
| style="vertical-align:middle;" | 15
| RECOVERY
| style="vertical-align:middle;" | I2C4-SDA
|  
| style="vertical-align:middle;" | LCD_DATA02
|  
| style="vertical-align:middle;" | E10
| System recovery pin:<br />    RECOVERY=0 during reset -> start recovery mode<br />    RECOVERY=1 or not connected -> normal operation mode
| style="vertical-align:middle;" | In  I2C mode external pull-up resistor is necessary (no any internal pull-up)
|  
|  
|  
|  
|-
|-
| 23
| style="vertical-align:middle;" | 16
| GND
| style="vertical-align:middle;" | I2C3-SDA
| -
| style="vertical-align:middle;" | LCD_DATA00
| -
| style="vertical-align:middle;" | B9
|  
| style="vertical-align:middle;" | In  I2C mode external pull-up resistor is necessary (no any internal pull-up)
|  
|  
|  
|  
|-
|-
| 24
| style="vertical-align:middle;" | 17
| RESET.IN
| style="vertical-align:middle;" | I2C4-SCL
| -
| style="vertical-align:middle;" | LCD_DATA03
| -
| style="vertical-align:middle;" | D10
| System reset
| style="vertical-align:middle;" | In  I2C mode external pull-up resistor is necessary (no any internal pull-up)
|  
|  
|  
|  
|-
|-
| 25
| style="vertical-align:middle;" | 18
| UART4.RXD
| style="vertical-align:middle;" | I2C3-SCL
| GPIO1.29
| style="vertical-align:middle;" | LCD_DATA01
| G16
| style="vertical-align:middle;" | A9
| Default Linux console RxD line
| style="vertical-align:middle;" | In  I2C mode external pull-up resistor is necessary (no any internal pull-up)
|  
|  
|  
|  
|-
|-
| 26
| style="vertical-align:middle;" | 19
| GND
| style="vertical-align:middle;" | ECSPI2-MOSI
| -
| style="vertical-align:middle;" | UART5_TX_DATA
| -
| style="vertical-align:middle;" | F17
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 27
| style="vertical-align:middle;" | 20
| UART4.TXD
| style="vertical-align:middle;" | UART7-RXD
| GPIO1.28
| style="vertical-align:middle;" | LCD_DATA16
| G17
| style="vertical-align:middle;" | C13
| Default Linux console TxD  line
| style="vertical-align:middle;" |
|  
|  
|  
|  
|-
|-
| 28
| style="vertical-align:middle;" | 21
| TAMPER.0
| style="vertical-align:middle;" | ECSPI2-MISO
| GPIO5.00
| style="vertical-align:middle;" | UART5_RX_DATA
| R10
| style="vertical-align:middle;" | G13
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 29
| style="vertical-align:middle;" | 22
| +3V3SW
| style="vertical-align:middle;" | UART7-TXD
| -
| style="vertical-align:middle;" | LCD_DATA17
| -
| style="vertical-align:middle;" | B13
| Reference 3.3V power supply for external peripherals,  maximum load 200 mA
| style="vertical-align:middle;" |
|  
|  
|  
|  
|-
|-
| 30
| style="vertical-align:middle;" | 23
| TAMPER.1
| style="vertical-align:middle;" | ECSPI2-SCLK
| GPIO5.01
| style="vertical-align:middle;" | UART4_TX_DATA
| R9
| style="vertical-align:middle;" | G17
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 32
| style="vertical-align:middle;" | 24
| TAMPER.2
| style="vertical-align:middle;" | UART7-CTS
| GPIO5.02
| style="vertical-align:middle;" | LCD_DATA07
| P11
| style="vertical-align:middle;" | D11
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 34
| style="vertical-align:middle;" | 25
| TAMPER.3
| style="vertical-align:middle;" | ECSPI2-CS
| GPIO5.03
| style="vertical-align:middle;" | UART4_RX_DATA
| P10
| style="vertical-align:middle;" | G16
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 36
| style="vertical-align:middle;" | 26
| TAMPER.4
| style="vertical-align:middle;" | UART7-RTS
| GPIO5.04
| style="vertical-align:middle;" | LCD_DATA06
| P9
| style="vertical-align:middle;" | A10
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|- style="text-align:center;"
| colspan="5" style="vertical-align:middle;" | J101
| style="text-align:left;" |
| style="text-align:left;" |
|-
|-
| 37
| style="vertical-align:middle;" | 1
| GND
| style="vertical-align:middle;" | +3,3VO
| -
| style="vertical-align:middle;" |
| -
| style="vertical-align:middle;" |
|  
| style="vertical-align:middle;" | +3,3V  power output (max. 100 mA) - paralelly connected to pin 1 of J100
|  
|  
|  
|  
|-
|-
| 38
| style="vertical-align:middle;" | 2
| TAMPER.5
| style="vertical-align:middle;" | +5V
| GPIO5.05
| style="vertical-align:middle;" |
| N8
| style="vertical-align:middle;" |
|  
| style="vertical-align:middle;" | External  power supply (power source) 5V - paralelly connected to pin 2 of J100
|  
|  
|  
|  
|-
|-
| 39
| style="vertical-align:middle;" | 3
| USB2.VBUS
| style="vertical-align:middle;" | USB1-DP
|  
| style="vertical-align:middle;" |  
| U12
| style="vertical-align:middle;" |
|  
| style="vertical-align:middle;" | Line  connected to USB1 channel through MUX (output ENET2_RX_ER, ball D16 is USB1  connection selector).<br />    Connected to USB1-DP MPU line if ENET2_RX_ER="0" (USB1-SEL), in  another case USB1-DP MPU line is connected to MicroUSB connector (USB-OTG).
|  
|  
|  
|  
|-
|-
| 40
| style="vertical-align:middle;" | 4
| TAMPER.6
| style="vertical-align:bottom;" | GND
| GPIO5.06
| style="vertical-align:middle;" |
| N11
| style="vertical-align:middle;" |
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 41
| style="vertical-align:middle;" | 5
| USB2.DN
| style="vertical-align:middle;" | USB1-DM
| -
| style="vertical-align:middle;" |
| T13
| style="vertical-align:middle;" |
|  
| style="vertical-align:middle;" | Line  connected to USB1 channel through MUX (output ENET2_RX_ER, ball D16 is USB1  connection selector).<br />    Connected to USB1-DM MPU line if ENET2_RX_ER="0" (USB1-SEL), in  another case USB1-DM MPU line is connected to MicroUSB connector (USB-OTG).
|  
|  
|  
|  
|-
|-
| 42
| style="vertical-align:middle;" | 6
| TAMPER.7
| style="vertical-align:middle;" | GPIO-6
| GPIO5.07
| style="vertical-align:middle;" | GPIO1_IO06
| N10
| style="vertical-align:middle;" | K17
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 43
| style="vertical-align:middle;" | 7
| USB2.DP
| style="vertical-align:middle;" | GPIO3.17
| -
| style="vertical-align:middle;" | LCD_DATA12
| U13
| style="vertical-align:middle;" | C12
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 44
| style="vertical-align:middle;" | 8
| TAMPER.8
| style="vertical-align:middle;" | GPIO-7
| GPIO5.08
| style="vertical-align:middle;" | GPIO1_IO07
| N9
| style="vertical-align:middle;" | L16
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 45
| style="vertical-align:middle;" | 9
| GND
| style="vertical-align:middle;" | GND
| -
| style="vertical-align:middle;" |
| -
| style="vertical-align:middle;" |
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 46
| style="vertical-align:middle;" | 10
| TAMPER.9
| style="vertical-align:middle;" | GPIO-8
| GPIO5.09
| style="vertical-align:middle;" | GPIO1_IO08
| R6
| style="vertical-align:middle;" | N17
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 47
| style="vertical-align:middle;" | 11
| GPIO1.05
| style="vertical-align:middle;" | CAN1-TX
| GPIO1.05
| style="vertical-align:middle;" | LCD_DATA08
| M17
| style="vertical-align:middle;" | B11
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 48
| style="vertical-align:middle;" | 12
| GND
| style="vertical-align:middle;" | GPIO-9
| -
| style="vertical-align:middle;" | GPIO1_IO09
| -
| style="vertical-align:middle;" | M15
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 49
| style="vertical-align:middle;" | 13
| USB1.VBUS
| style="vertical-align:middle;" | CAN1-RX
| -
| style="vertical-align:middle;" | LCD_DATA09
| T12
| style="vertical-align:middle;" | A11
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 50
| style="vertical-align:middle;" | 14
| JTAG.TCK
| style="vertical-align:middle;" | GND
| GPIO1.14
| style="vertical-align:middle;" |
| M14
| style="vertical-align:middle;" |
| Optionally used as 32kHz clock source for 1DX radio module
| style="vertical-align:middle;" |
|  
|  
|  
|  
|-
|-
| 51
| style="vertical-align:middle;" | 15
| USB1.DN
| style="vertical-align:middle;" | CAN2-TX
| -
| style="vertical-align:middle;" | LCD_DATA10
| T15
| style="vertical-align:middle;" | E12
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 52
| style="vertical-align:middle;" | 16
| JTAG.TDI
| style="vertical-align:middle;" | GPIO3.2
| GPIO1.13
| style="vertical-align:middle;" | LCD_HSYNC
| N16
| style="vertical-align:middle;" | D9
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 53
| style="vertical-align:middle;" | 17
| USB1.DP
| style="vertical-align:middle;" | CAN2-RX
| -
| style="vertical-align:middle;" | LCD_DATA11
| U15
| style="vertical-align:middle;" | D12
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 54
| style="vertical-align:middle;" | 18
| JTAG.TDO
| style="vertical-align:middle;" | GPIO3.3
| GPIO1.12
| style="vertical-align:middle;" | LCD_VSYNC
| N15
| style="vertical-align:middle;" | C9
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 55
| style="vertical-align:middle;" | 19
| GND
| style="vertical-align:middle;" | MQS-R
| -
| style="vertical-align:middle;" | LCD_DATA22
| -
| style="vertical-align:middle;" | A14
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 56
| style="vertical-align:middle;" | 20
| JTAG.TMS
| style="vertical-align:middle;" | UART2-RXD
| GPIO1.11
| style="vertical-align:middle;" | UART2_RX_DATA
| P14
| style="vertical-align:middle;" | J16
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 57
| style="vertical-align:middle;" | 21
| USB1.ID
| style="vertical-align:middle;" | MQS-L
| GPIO1.00
| style="vertical-align:middle;" | LCD_DATA23
| K13
| style="vertical-align:middle;" | B16
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 58
| style="vertical-align:middle;" | 22
| JTAG.TRST
| style="vertical-align:middle;" | UART2-TXD
| GPIO1.15
| style="vertical-align:middle;" | UART2_TX_DATA
| N14
| style="vertical-align:middle;" | J17
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 60
| style="vertical-align:middle;" | 23
| GND
| style="vertical-align:middle;" | GPIO3.25
| -
| style="vertical-align:middle;" | LCD_DATA20
| -
| style="vertical-align:middle;" | C14
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 62
| style="vertical-align:middle;" | 24
| UART1.CTS
| style="vertical-align:middle;" | UART2-CTS
| GPIO1.18
| style="vertical-align:middle;" | UART2_CTS
| K15
| style="vertical-align:middle;" | J15
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 63
| style="vertical-align:middle;" | 25
| GND
| style="vertical-align:middle;" | GPIO3.26
| -
| style="vertical-align:middle;" | LCD_DATA21
| -
| style="vertical-align:middle;" | B14
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 64
| style="vertical-align:middle;" | 26
| UART1.RTS
| style="vertical-align:middle;" | UART2-RTS
| GPIO1.19
| style="vertical-align:middle;" | UART2_RTS
| J14
| style="vertical-align:middle;" | H14
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|- style="text-align:center;"
| colspan="5" style="vertical-align:middle;" | J102
| style="text-align:left;" |
| style="text-align:left;" |
|-
|-
| 65
| style="vertical-align:middle;" | 1
| ENET2.TX-CLK
| style="vertical-align:middle;" | UART1-TXD
| GPIO2.14
| style="vertical-align:middle;" | UART1_TX_DATA
| D17
| style="vertical-align:middle;" | K14
|  
| style="vertical-align:middle;" | TxD  line of Linux console port (LV-TTL logic levels)
|  
|  
|  
|  
|-
|-
| 66
| style="vertical-align:middle;" | 2
| UART1.RXD
| style="vertical-align:middle;" | UART1-RXD
| GPIO1.17
| style="vertical-align:middle;" | UART1_RX_DATA
| K16
| style="vertical-align:middle;" | K16
|  
| style="vertical-align:middle;" | RxD  line of Linux console port (LV-TTL logic levels)
|  
|  
|  
|  
|-
|-
| 67
| style="vertical-align:middle;" | 3
| ENET2.TXD1
| style="vertical-align:middle;" | GND
| GPIO2.12
| style="vertical-align:middle;" |
| A16
| style="vertical-align:middle;" |
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|- style="text-align:center;"
| colspan="5" style="vertical-align:middle;" | Another functions
| style="text-align:left;" |
| style="text-align:left;" |
|-
|-
| 68
| style="vertical-align:middle;" |
| UART1.TXD
| style="vertical-align:middle;" | BUZZER
| GPIO1.16
| style="vertical-align:middle;" | GPIO1_IO05
| K14
| style="vertical-align:middle;" | M17
|  
| style="vertical-align:middle;" | Electromagnetic  speaker control output (thru NPN driver)
|  
|  
|  
|  
|-
|-
| 69
| style="vertical-align:middle;" |
| ENET2.TXD0
| style="vertical-align:middle;" | SYSLED
| GPIO2.11
| style="vertical-align:middle;" | ENET2_TX_CLK
| A15
| style="vertical-align:middle;" | D17
|  
| style="vertical-align:middle;" | System  or user LED control output (heartbeat by default, thru NPN driver)
|  
|  
|  
|  
|-
|-
| 70
| style="vertical-align:middle;" |
| UART2.CTS
| style="vertical-align:middle;" | USRLED
| GPIO1.22
| style="vertical-align:middle;" | LCD_DATA14
| J15
| style="vertical-align:middle;" | A12
|  
| style="vertical-align:middle;" | User  LED control output (thru NPN driver)
|  
|  
|  
|  
|-
|-
| 71
| style="vertical-align:middle;" |
| ENET2.TXEN
| style="vertical-align:middle;" | WDOG-B
| GPIO2.13
| style="vertical-align:middle;" | LCD_RESET
| B15
| style="vertical-align:middle;" | E9
|  
| style="vertical-align:middle;" | Used  by system, do not modify default configuration
|  
|  
|  
|  
|-
|-
| 72
| style="vertical-align:middle;" |
| UART2.RTS
| style="vertical-align:middle;" | ENET-MDIO
| GPIO1.23
| style="vertical-align:middle;" | ENET2_RX_DATA0
| H14
| style="vertical-align:middle;" | C17
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 73
| style="vertical-align:middle;" |
| ENET2.RXER
| style="vertical-align:middle;" | ENET-MDC
| GPIO2.15
| style="vertical-align:middle;" | ENET2_RX_DATA1
| D16
| style="vertical-align:middle;" | C16
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 74
| style="vertical-align:middle;" |
| UART2.RXD
| style="vertical-align:middle;" | ENET1-RST
| GPIO1.21
| style="vertical-align:middle;" | ENET2_RX_EN
| J16
| style="vertical-align:middle;" | B17
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 75
| style="vertical-align:middle;" |
| ENET2.RXEN
| style="vertical-align:middle;" | ENET1-INT
| GPIO2.10
| style="vertical-align:middle;" | ENET2_TX_DATA0
| B17
| style="vertical-align:middle;" | A15
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 76
| style="vertical-align:middle;" |
| UART2.TXD
| style="vertical-align:middle;" | USB1-SEL
| GPIO1.20
| style="vertical-align:middle;" | ENET2_RX_ER
| J17
| style="vertical-align:middle;" | D16
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 77
| style="vertical-align:middle;" |
| ENET2.RXD0
| style="vertical-align:middle;" | USB1-ID
| GPIO2.08
| style="vertical-align:middle;" | GPIO1_IO00
| C17
| style="vertical-align:middle;" | K13
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 78
| style="vertical-align:middle;" |
| UART3.CTS
| style="vertical-align:middle;" | USB1-VBUS-OC
| GPIO1.26
| style="vertical-align:middle;" | GPIO1_IO01
| H15
| style="vertical-align:middle;" | L15
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 79
| style="vertical-align:middle;" |
| ENET2.RXD1
| style="vertical-align:middle;" | USB1-VBUS-EN
| GPIO2.09
| style="vertical-align:middle;" | GPIO1_IO04
| C16
| style="vertical-align:middle;" | M16
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 80
| style="vertical-align:middle;" |
| UART3.RTS
| style="vertical-align:middle;" | USB2-VBUS-OC
| GPIO1.27
| style="vertical-align:middle;" | GPIO1_IO03
| G14
| style="vertical-align:middle;" | L17
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 81
| style="vertical-align:middle;" |
| ENET.MDC
| style="vertical-align:middle;" | USB2-VBUS-EN
| GPIO1.07
| style="vertical-align:middle;" | GPIO1_IO02
| L16
| style="vertical-align:middle;" | L14
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|- style="text-align:center;"
| colspan="5" style="vertical-align:middle;" | WiFi and BLE module connection
| style="text-align:left;" |
| style="text-align:left;" |
|-
|-
| 82
| style="vertical-align:middle;" |
| UART3.RXD
| style="vertical-align:middle;" | BT-ENABLE
| GPIO1.25
| style="vertical-align:middle;" | CSI_MCLK
| H16
| style="vertical-align:middle;" | F5
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 83
| style="vertical-align:middle;" |
| ENET.MDIO
| style="vertical-align:middle;" | WLAN-HWAKE
| GPIO1.06
| style="vertical-align:middle;" | CSI_PIXCLK
| K17
| style="vertical-align:middle;" | E5
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 84
| style="vertical-align:middle;" |
| UART3.TXD
| style="vertical-align:middle;" | BT-HWAKE
| GPIO1.24
| style="vertical-align:middle;" | CSI_VSYNC
| H17
| style="vertical-align:middle;" | F2
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 85
| style="vertical-align:middle;" |
| GND
| style="vertical-align:middle;" | BT-WAKE
| -
| style="vertical-align:middle;" | CSI_HSYNC
| -
| style="vertical-align:middle;" | F3
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 86
| style="vertical-align:middle;" |
| GND
| style="vertical-align:middle;" | BT-RXD
| -
| style="vertical-align:middle;" | CSI_DATA00
| -
| style="vertical-align:middle;" | E4
|  
| style="vertical-align:middle;" | UART5
|  
|  
|  
|  
|-
|-
| 87
| style="vertical-align:middle;" |
| ENET1.LED0
| style="vertical-align:middle;" | BT-TXD
| -
| style="vertical-align:middle;" | CSI_DATA01
| -
| style="vertical-align:middle;" | E3
| LED0/nWAYEN - output PHY signal (LED cathode)
| style="vertical-align:middle;" | UART5
|  
|  
|  
|  
|-
|-
| 89
| style="vertical-align:middle;" |
| ENET1.LED1
| style="vertical-align:middle;" | BT-RTS
| -
| style="vertical-align:middle;" | CSI_DATA02
| -
| style="vertical-align:middle;" | E2
| LED0/SPEED - output PHY  signal (LED cathode)
| style="vertical-align:middle;" | UART5
|  
|  
|  
|  
|-
|-
| 91
| style="vertical-align:middle;" |
| ENET1.RXN
| style="vertical-align:middle;" | BT-RTS
| -
| style="vertical-align:middle;" | CSI_DATA03
| -
| style="vertical-align:middle;" | E1
| Rx_n - external Ethernet trafo connector
| style="vertical-align:middle;" | UART5
|  
|  
|  
|  
|-
|-
| 93
| style="vertical-align:middle;" |
| ENET1.RXP
| style="vertical-align:middle;" | BT-PCM-SYNC
| -
| style="vertical-align:middle;" | CSI_DATA04
| -
| style="vertical-align:middle;" | D4
| Rx_p - external Ethernet  trafo connector
| style="vertical-align:middle;" |
|  
|  
|  
|  
|-
|-
| 95
| style="vertical-align:middle;" |
| ENET1.TXN
| style="vertical-align:middle;" | BT-PCM-CLK
| -
| style="vertical-align:middle;" | CSI_DATA05
| -
| style="vertical-align:middle;" | D3
| Tx_n - external Ethernet  trafo connector
| style="vertical-align:middle;" |
|  
|  
|  
|  
|-
|-
| 97
| style="vertical-align:middle;" |
| ENET1.TXP
| style="vertical-align:middle;" | BT-PCM-OUT
| -
| style="vertical-align:middle;" | CSI_DATA06
| -
| style="vertical-align:middle;" | D2
| Tx_p - external Ethernet trafo connector
| style="vertical-align:middle;" |
|  
|  
|  
|  
|-
|-
| 99
| style="vertical-align:middle;" |
| GND
| style="vertical-align:middle;" | BT-PCM-IN
| -
| style="vertical-align:middle;" | CSI_DATA07
| -
| style="vertical-align:middle;" | D1
|  
| style="vertical-align:middle;" |  
|  
|  
|  
|  
|-
|-
| 100
| style="vertical-align:middle;" |
| GND
| style="vertical-align:middle;" | CLK32kHz
| -
| style="vertical-align:middle;" | JTAG_CTK
| -
| style="vertical-align:middle;" | M14
|  
| style="vertical-align:middle;" | Clock  output to 1DX radio module (WiFi/BLE)
|  
|  
|  
|  
|-
|-
| -
| style="vertical-align:middle;" |
| JTAG.MOD
| style="vertical-align:middle;" | JTAG_MOD
| GPIO1.10
| style="vertical-align:middle;" | JTAG_MOD
| P15
| style="vertical-align:middle;" | P15
| Used   as hardware reset Ethernet PHY with 4.7k pull-down resistor
| style="vertical-align:middle;" | Permanently   connected to GND
|  
|  
|  
|  
|-
|-
| -
| style="vertical-align:middle;" |
| BOOT.MODE1
| style="vertical-align:middle;" | BOOT_MODE1
| -
| style="vertical-align:middle;" | BOOT_MODE1
| U10
| style="vertical-align:middle;" | U10
| Permanently  connected to GND
| style="vertical-align:middle;" | Permanently  connected to GND
|
|
|}
|}


== Dimensions ==
== Dimensions ==
[[File:StarSOM-6ULL-dimensions.png|center]]
[[File:StarSOM-6ULL-dimensions.png|center]]

Revision as of 14:00, 8 December 2022

StarSBC-6ULL Datasheet and Pinout

General description

The StarSBC-6ULL SBC (Single Board Computer) is small but powerful IoT Sensor Hub, optimized for operation in applications requiring a large number of communication interfaces. The StarSBC-6ULL is equipped with on-board PHY 10/100 Mb/s Ethernet interface, Murata 1DX radio module (integrated WiFi/BLE), USB host and USB-OTG interfaces. The StarSBC-6ULL supports connections to a variety of interfaces: I2C, SPI, UART and CAN. Additionally the StarSBC-6ULL module is equipped with easy to use 2×26 pin connectors with 40 GPIOs for any use in user application.

The StarSBC-6ULL can be optionally equipped with communication expander module SLH2-comm, which is equipped with 2 x CAN, 2 x RS485, 2 x RS232 physical layers interfaces.

The StarSBC-6ULL supports industrial grade embedded applications.

Applications

  • IoT Sensor Hubs
  • Home Appliances
  • IoT gateways
  • Protocol converters
  • Home Automation – Smart Home
  • Point-of-sales (POS) terminals
  • Cash Register
  • 2D barcode scanners and printers
  • Smart grid infrastructure
  • Residential gateways
  • Outdoor equipment

Features

  • Powered by NXP i.MX 6ULL application processor
  • Core clock up to 900MHz
  • Up to 1GB RAM DDR3L
  • Up to 32GB eMMC
  • Optional Murata 802.11b/g/n Wi-Fi and Bluetooth v5.1 module
  • Power-efficient and cost-optimized solution
  • Ideal for industrial IoT and embedded applications
  • Integrated security features

Pictures of SBC versions

Version Photo
eMMC
Wi-Fi and Ethernet PHY10/100 are available as an options.

Ordering info

SLS06Y2_Clock_RamSize_FlashSize_SF_TEMP
SLSProduct type
SLS - System on Module
0SOM Name
0 - StarSOM board-to-board connectors
6CPU Family
6 - i.MX6
Y2CPU Type
Y2 - i.MX6 ULL Y2
ClockCPU Clock Speed
528C - 528MHz
792C - 792MHz
900C - 900MHz
RamSizeDDR3 RAM Size
128R - 128MB
256R - 256MB
512R - 512MB
FlashSizeFlash Size Type and Density
04GE - 4GB eMMC
08GE - 8GB eMMC
16GE - 16GB eMMC
32GE - 32GB eMMC
SFSpecial Features
0SF - No Special Features
1WB - Built-in Murata 802.11b/g/n Wi-Fi and Bluetooth v5.1 Module
2ET - Built-in Microchip 100Mb Ethernet PHY
3WE - Built-in Murata 802.11b/g/n Wi-Fi/Bluetooth v5.1 and Microchip 100Mb Ethernet PHY
TEMPOperating Temperature
C - Consumer: 0 to +70 C
E - Extended with Wi-Fi: -25 to +70 C
I - Industrial: -40 to +85 C

Block Diagram

Operating ranges

Parameter Value Unit Comment
Power Supply
5
V
 Connected to J100 or J101 or USB conenctors
Input GPIO voltage
3.3
V
 -
Environment temperature1
-40…+85
 oC Industrial range w/o WiFi module
-25…+70
 Industrial (extended) range with WiFi module
0…+70
 Consumer range

Note:
1. Maximum MPU junction temperature is +105oC (industrial version) or +95oC (consumer version).

Electrical parameters

SOM
signal name 		Parameter Value Units
Min. Typ. Max.
+3V3IN Supply Voltage 3.15 3.3 3.45 V
+3V3IN Total Supply Current1 - 175 255 mA
VGPIO GPIO Input Voltage 0 3.3 3.62 V
+3V3SW Output current of 3.3V power supply for peripherals
 - - 0.2 A
USB-OTGx-VBUS USB Supply 4.40 - 5.5 V
VDD-COIN-3V SNVS Backup
Battery Supply 		2.66 - 3.6 V
- ADC Inputs Voltage 0 - 3.3 V

Notes:
1. Excluding external load connected to +3.3VOUT lines.
2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.

Connector pin number Default function GPIO Ball numer BGA289 Notes
J100
1 +3,3VO +3,3V power output (max. 100 mA) - paralelly connected to pin 1 of J101
2 +5V External power supply (power source) 5V - paralelly connected to pin 2 of J101
3 UART8-RXD ENET2_TX_EN B15
4 GND
5 UART8-TXD ENET2_TX_DATA1 A16
6 UART3-TXD UART3_TX_DATA H17
7 PWM5 LED_DATA18 A13
8 UART3-RXD UART3_RX_DATA H16
9 GND
10 UART3-CTS UART3_CTS H15
11 UART4-RXD LCD_ENABLE B8
12 UART3-RTS UART3_RTS G14
13 UART4-TXD LCD_CLK A8
14 GND
15 I2C4-SDA LCD_DATA02 E10 In I2C mode external pull-up resistor is necessary (no any internal pull-up)
16 I2C3-SDA LCD_DATA00 B9 In I2C mode external pull-up resistor is necessary (no any internal pull-up)
17 I2C4-SCL LCD_DATA03 D10 In I2C mode external pull-up resistor is necessary (no any internal pull-up)
18 I2C3-SCL LCD_DATA01 A9 In I2C mode external pull-up resistor is necessary (no any internal pull-up)
19 ECSPI2-MOSI UART5_TX_DATA F17
20 UART7-RXD LCD_DATA16 C13
21 ECSPI2-MISO UART5_RX_DATA G13
22 UART7-TXD LCD_DATA17 B13
23 ECSPI2-SCLK UART4_TX_DATA G17
24 UART7-CTS LCD_DATA07 D11
25 ECSPI2-CS UART4_RX_DATA G16
26 UART7-RTS LCD_DATA06 A10
J101
1 +3,3VO +3,3V power output (max. 100 mA) - paralelly connected to pin 1 of J100
2 +5V External power supply (power source) 5V - paralelly connected to pin 2 of J100
3 USB1-DP Line connected to USB1 channel through MUX (output ENET2_RX_ER, ball D16 is USB1 connection selector).
Connected to USB1-DP MPU line if ENET2_RX_ER="0" (USB1-SEL), in another case USB1-DP MPU line is connected to MicroUSB connector (USB-OTG).
4 GND
5 USB1-DM Line connected to USB1 channel through MUX (output ENET2_RX_ER, ball D16 is USB1 connection selector).
Connected to USB1-DM MPU line if ENET2_RX_ER="0" (USB1-SEL), in another case USB1-DM MPU line is connected to MicroUSB connector (USB-OTG).
6 GPIO-6 GPIO1_IO06 K17
7 GPIO3.17 LCD_DATA12 C12
8 GPIO-7 GPIO1_IO07 L16
9 GND
10 GPIO-8 GPIO1_IO08 N17
11 CAN1-TX LCD_DATA08 B11
12 GPIO-9 GPIO1_IO09 M15
13 CAN1-RX LCD_DATA09 A11
14 GND
15 CAN2-TX LCD_DATA10 E12
16 GPIO3.2 LCD_HSYNC D9
17 CAN2-RX LCD_DATA11 D12
18 GPIO3.3 LCD_VSYNC C9
19 MQS-R LCD_DATA22 A14
20 UART2-RXD UART2_RX_DATA J16
21 MQS-L LCD_DATA23 B16
22 UART2-TXD UART2_TX_DATA J17
23 GPIO3.25 LCD_DATA20 C14
24 UART2-CTS UART2_CTS J15
25 GPIO3.26 LCD_DATA21 B14
26 UART2-RTS UART2_RTS H14
J102
1 UART1-TXD UART1_TX_DATA K14 TxD line of Linux console port (LV-TTL logic levels)
2 UART1-RXD UART1_RX_DATA K16 RxD line of Linux console port (LV-TTL logic levels)
3 GND
Another functions
BUZZER GPIO1_IO05 M17 Electromagnetic speaker control output (thru NPN driver)
SYSLED ENET2_TX_CLK D17 System or user LED control output (heartbeat by default, thru NPN driver)
USRLED LCD_DATA14 A12 User LED control output (thru NPN driver)
WDOG-B LCD_RESET E9 Used by system, do not modify default configuration
ENET-MDIO ENET2_RX_DATA0 C17
ENET-MDC ENET2_RX_DATA1 C16
ENET1-RST ENET2_RX_EN B17
ENET1-INT ENET2_TX_DATA0 A15
USB1-SEL ENET2_RX_ER D16
USB1-ID GPIO1_IO00 K13
USB1-VBUS-OC GPIO1_IO01 L15
USB1-VBUS-EN GPIO1_IO04 M16
USB2-VBUS-OC GPIO1_IO03 L17
USB2-VBUS-EN GPIO1_IO02 L14
WiFi and BLE module connection
BT-ENABLE CSI_MCLK F5
WLAN-HWAKE CSI_PIXCLK E5
BT-HWAKE CSI_VSYNC F2
BT-WAKE CSI_HSYNC F3
BT-RXD CSI_DATA00 E4 UART5
BT-TXD CSI_DATA01 E3 UART5
BT-RTS CSI_DATA02 E2 UART5
BT-RTS CSI_DATA03 E1 UART5
BT-PCM-SYNC CSI_DATA04 D4
BT-PCM-CLK CSI_DATA05 D3
BT-PCM-OUT CSI_DATA06 D2
BT-PCM-IN CSI_DATA07 D1
CLK32kHz JTAG_CTK M14 Clock output to 1DX radio module (WiFi/BLE)
JTAG_MOD JTAG_MOD P15 Permanently connected to GND
BOOT_MODE1 BOOT_MODE1 U10 Permanently connected to GND

Dimensions

Retrieved from "https://wiki.somlabs.com/index.php?title=StarSBC-6ULL_Datasheet_and_Pinout&oldid=2960"