VisionSOM-RT-ETH: Difference between revisions
From SomLabs Wiki
Created page with "{{Product|category1=SOM|category2=|image=VisionSOM-RT-ETH.png |cpu=NXP i.MX RT Cortex-M7 32-bit processor (CPU clock up to 528MHz) |ram=512kB on-chip RAM, up to 32MB SDRAM |storage=4 or 16MB QSPI Flash |gfx= NXP PXP 2D <br>graphics accelerator for LCD-TFT |display=24-bit RGB parallel interface |i2c=up to 4 channels |spi=up to 4 channels |can=up to 2 FlexCAN |temp= -40 to +85°C |usb=2 x USB2.0 OTG |audio=3 x I2S/SAI, <br>S/PDIF Tx/Rx |uart=up to 8 channels |dim=67mm x 32..." |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Product|category1=SOM|category2=|image= | {{Product|category1=SOM|category2=|image=visionsom-rt-eth-products.png | ||
|cpu=NXP i.MX RT Cortex-M7 32-bit processor (CPU clock up to 528MHz) | |cpu=NXP i.MX RT Cortex-M7 32-bit processor (CPU clock up to 528MHz) | ||
|ram=512kB on-chip RAM, up to 32MB SDRAM | |ram=512kB on-chip RAM, up to 32MB SDRAM | ||
Revision as of 13:13, 4 September 2025
| VisionSOM-RT-ETH |
|
VisionSOM-RT is comprised of a small processor module with CPU bus accessibility and standard I/O functionality and is an ideal solution for embedded projects. VisionSOM-RT can often trim 8-12 months from design cycle and can be easy adapted to existing projects or can be used together with a dedicated carrier board. Customers who are looking for a complete solution can use a set comprised of System on Module (SoM) and Carrier Board (CB). VisionSOM-RT requires a matching customer’s board or a carrier board to establish a complete system. Carrier Board together with VisionSOM-RT is ready to use computer on board and is giving enormous flexibility in building projects. |
Documentation
- Datasheet and Pinout
- VisionSOM-RT - Datasheet
- Default pin configuration (MEX file)
- EM Radiation Test Precompliance Report (EMC) v1.0
- VisionSOM-RT - Altium Designer PCB/SCH library with 3D SoM and connector models v3/2020
- VisionSOM-RT - Altium Designer PCB/SCH library with 3D SoM and connector models v12/2023
- VisionSOM-RT - STEP
- I.MXRT - Fact Sheet
How to
Development tutorials
| Specifications |
| CPU | NXP i.MX RT Cortex-M7 32-bit processor (CPU clock up to 528MHz) |
| Memory | 512kB on-chip RAM, up to 32MB SDRAM |
| GPU | NXP PXP 2D graphics accelerator for LCD-TFT |
| Display | 24-bit RGB parallel interface |
| Storage | 4 or 16MB QSPI Flash |
| I2C | up to 4 channels |
| SPI | up to 4 channels |
| CAN | up to 2 FlexCAN |
| UART | up to 8 channels |
| USB | 2 x USB2.0 OTG |
| Audio | 3 x I2S/SAI, S/PDIF Tx/Rx |
| Temperature Range | -40 to +85°C |
| Dimensions | 67mm x 32mm x 4mm SODIMM200 module |
