VisionCB-8M-ADV: Difference between revisions
From SomLabs Wiki
No edit summary |
No edit summary |
||
| Line 23: | Line 23: | ||
content=  | content=  | ||
*[[VisionCB-8M-ADV Datasheet and Pinout|VisionCB-8M-ADV Datasheet and Pinout]] | *[[VisionCB-8M-ADV Datasheet and Pinout|VisionCB-8M-ADV Datasheet and Pinout]] | ||
__WP_Files( | __WP_Files(3225) | ||
}}{{DocBox|boxwidth=21|system=Howto | }}{{DocBox|boxwidth=21|system=Howto | ||
| | | | ||
Revision as of 12:32, 28 January 2021
| VisionCB-8M-ADV |
|
VisionCB-8M-ADV is a carrier board for the VisionSOM-8Mmini family of computer-on-modules which are powered by NXP SOC iMX8Mmini (quad core ARM Cortex-A53+ single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, PCIe, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
The carrier board connects with the SoM via a standard SODIMM connector.
VisionCB-8M-ADV carrier board is equipped with Segger J-Link debugger and Linux serial console port on USB vCOM.
|
Documentation
How to
| Specifications |
| SOM compatibility | VisionSOM-8Mmini module with quad core NXP iMX8Mmini processor (4 x Cortex-A53 + Cortex-M4) |
| SOM socket | SODIMM200 |
| Display connector | up to 4 lanes MIPI-DSI interface (FPC30) |
| Network | 1x Ethernet 10/100/1000Mbit/s, RJ45 |
| USB | USB 2.0 host x1 USB-OTG 2.0 x1 |
| Debugger | Built-in Segger J-Link (JTAG) |
| Console interface | USB/UART |
| Switches | 4/2 (user/system) |
| LEDs | 4/2 (user/system) |
| Connectors | MIPI-CSI2 camera connector (FPC30) PCIe (1 lane, FPC16) Raspberry Pi compatible (40 pins, 2.54mm) MicroSD socket Serial comm (20 pins, 2.54mm) |
| Power supply | External 9-12V DC |
| Temperature Range | 0 to +70°C |
| Dimensions | 160mm x 100mm x 18mm |
