VisionCB-8M-ADV

VisionCB-8M-ADV

VisionCB-8M-ADV is a carrier board for the VisionSOM-8Mmini family of computer-on-modules which are powered by NXP SOC iMX8Mmini (quad core ARM Cortex-A53+ single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, PCIe, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. The carrier board connects with the SoM via a standard SODIMM connector. VisionCB-8M-ADV carrier board is equipped with HDMI/LVDS and MIPI-DSI video outputs, 24-bit audio codec, PCIe (M.2 key M) socket (2242, 2260, 2280), on-board RTC with battery socket, RS485 and CAN-FD interfaces. VisionCB-8M-ADV carrier board is equipped with Segger J-Link debugger and Linux serial console port on USB vCOM.

Documentation

• VisionCB-8M-ADV Datasheet and Pinout
• VisionCB-8Mmini-ADV - Datasheet
• VisionCB-8Mmini-ADV - STEP
• VisionCB-8Mmini-ADV - Wiki Page for CB (Additional Resources)
• PCN 3/2023 (upgrade PCB version from 1.2 to 1.4)

How to

• VisionCB-8M-ADV Power Supply

Specifications

SOM compatibility	VisionSOM-8Mmini module with quad core NXP iMX8Mmini processor (4 x Cortex-A53 + Cortex-M4)
SOM socket	SODIMM200
Display connector	LVDS (goldpin 2x10) HDMI up to 4 lanes MIPI-DSI interface (FPC30)
Network	1x Ethernet 10/100/1000Mbit/s, RJ45
USB	USB 2.0 host x1 USB-OTG 2.0 x1
Console interface	USB/UART
Switches	4/1 (user/system)
LEDs	4/2/1 (user/system/diagnostic)
Connectors	Serial Comm (goldpin 2x8) GPIOs (goldpin 2x20) 1x RS485 (goldpin 1x3) 1x CAN-FD (goldpin 1x3) 1x MIPI-CSI
Power supply	External 9-12V DC
Temperature Range	0 to +70°C
Dimensions	130mm x 90mm x 20mm