SL-MIPI-LVDS-HDMI-CNV-11 Datasheet and Pinout

SL-MIPI-LVDS-HDMI-CNV-11 Datasheet and Pinout

SL-MIPI-LVDS-HDMI-CNV MIPI-DSI to LVDS and HDMI converter Datasheet and Pinout

---

General description

SL-MIPI-LVDS-HDMI-CNV (MIPI-DSI to LVDS HDMI converter) is flexible MIPI-DSI to LVDS and/or HDMI converter. The solution we dedicate to SoMLabs carrier boards equipped with MIPI-DSI interface (with FPC30 connector). Converter is fully compliant with DSI1.02 and HDMI1.4 and converts video stream up to 1080p @60Hz/8b. SL-MIPI-LVDS-HDMI-CNV is fully compatible with SoMLabs carrier borads equipeed with MIPI-CSI FPC30 connector.

Features

• MIPI-DSI to LVDS and/or HDMI display converter
• Integrated D-PHY1.1 (DSI1.02)
• From 1 up to 4 MIPI input data lanes
• Compatible with MIPI-DSI data packets: 18bpp, RGB666 and 24bpp RGB888
• Input bandwidth up tp 6Gb/s (4 lanes)
• LVDS output clocking up to 154 MHz
• Fully compatible with SoMLabs carrier board:
  • VisionCB-8M-STD (dedicated to i.MX8M mini multicore MPU)
  • VisionCB-STM32MP1-STD (dedicated to STM32MP1 multicore MPU)
• Plug & Play solution for SoMLabs customers
• Integrated stereo audio channel
• Connection with carrier board using FPC30 cable A-A type

Pictures

Ordering info

SL-MIPI-LVDS-HDMI-CNV - FPC 30-pin flat cable (A-A) is included.

Operating ranges

Parameter	Value	Unit	Comment
Power Supply	5.0	V	Powered from carrier board
Current	0.1	A	Maximum peak value
Environment temperature	-40…+85	oC	-

Electrical parameters

Signal name	Parameter	Value			Units
		Min.	Typ.	Max.
+5V	Supply Voltage	4.0	5.0	5.5	V
-	Total Supply Current	230	330	400	mA
VIO	Video IO Input Voltage	0	3.3	3.6	V
VTPIO	TP Controller IO Voltage	0	3.3	3.6	V
VPWREN	Power Enable Input Voltage	0	-	5.5	V
fTPI2C	TP Controller I2C Speed	-	-	400	kHz
fPWM	PWM Dimming Frequency	-	-	1	kHz
RINT	Interrupt Output Pull-up Resistance	-	10	-	kΩ
RPWREN	Power Enable Pull-up Resistance	-	10	-	kΩ
RTPI2C	Touch Panel Controller I2C IOs Pull-up Resistance	-	2.2	-	kΩ

MIPI-DSI (input) Pinout

FPC30 connector pin	Function name	Description
1	GND	-
2	-	-
3	HPD	HPD line from HDMI (voltage translated to 3.3V)
4	+5V	Power supply (input)
5	+5V	Power supply (input)
6	+3.3V	Power supply (input)
7	+3.3V	Power supply (input)
8	GND	-
9	SPDIF-TX	SPDIF input from SBC
10	INT	Interrupt output (voltage translated to 3.3V)
11	RESET	Reset input (voltage translated to 3.3V)
12	GND	-
13	SDA	I2C SDA line (voltage translated to 3.3V)
14	SCL	I2C SCL line (voltage translated to 3.3V)
15	GND	-
16	D3n	MIPI-DSI lane 3 negative line
17	D3p	MIPI-DSI lane 3 positive line
18	GND	-
19	D2n	MIPI-DSI lane 2 negative line
20	D2p	MIPI-DSI lane 2 positive line
21	GND	-
22	D1n	MIPI-DSI lane 1 negative line
23	D1p	MIPI-DSI lane 1 positive line
24	GND	-
25	D0n	MIPI-DSI lane 0 negative line
26	D0p	MIPI-DSI lane 0 positive line
27	GND	-
28	CLKn	MIPI-DSI clock negative line
29	CLKp	MIPI-DSI clock positive line
30	GND	-

LVDS (output) Pinout

LVDS connector pin	Function name	Description
1	+5V	Power supply for external devices (max. 20 mA) Internally connected with pin 2
2	+5V	Power supply for external devices (max. 20 mA) Internally connected with pin 1
3	-	-
4	GND	-
5	GND	-
6	GND	-
7	D0n	LVDS D0n data line
8	D0p	LVDS D0p data line
9	D1n	LVDS D1n data line
10	D1p	LVDS D1p data line
11	D2n	LVDS D2n data line
12	D2p	LVDS D2p data line
13	GND	-
14	GND	-
15	CLKn	LVDS CLKn clock line
16	CLKp	LVDS CLKp clock line
17	D3p	LVDS D3p data line
18	D3n	LVDS D3n data line

Dimensions