SL-MIPI-CSI-OV5640 Datasheet and Pinout

SL-MIPI-CSI-OV5640 5Mpx camera module with MIPI-CSI interface and OV5640 video sensor Datasheet and Pinout

---

General description

SL-MIPI-CSI-OV5640 is the 5 Mpx color camera module. Module is equipped with MIPI-CSI interface and FPC30 connector therefore SL-MIPI-CSI-OV5640 module is matched to the SoMLabs carrier boards.
The SL-MIPI-CSI-OV5640 is equipped with OV5640 hi-res HD 5 Mpx CMOS video sensor. Video interface is dual lane MIPI-CSI interface and module supports electronic shutter mode: rolling shutter/frame exposure.
As a result of using advanced PMIC – SL1 – developed by SoMLabs, the SL-MIPI-CSI-OV5640 module is powered from single +3.3V line available in FPC connector.
The SL-MIPI-CSI-OV5640 is fully compatible with SoMLabs carrier boards equipped with MIPI-CSI connectors. By default SL-MIPI-CSI-OV5640 module is equipped with fish-eye (120º) lens.

Features

• Based on OV5640 CMOS video chip
• Resolution 2592 x 1944 px
• Fish-eye lens (120º)
• Output formats: 8/10-b RGB RAW
• MIPI-CSI interface (2 lanes)
• Typical frame rates:
• QSXGA (2592×1944): 15 fps
  • 1080p: 30 fps
  • 1280×960: 45 fps
  • 720p: 60 fps
  • VGA (640×480): 90 fps
  • QVGA (320×240): 120 fps
• Shutter: rolling/frame exposure
• Single rail +3.3V power supply
• Configuration via I2C
• Operating temperature -30÷+70°C
• Fully compatible with SoMLabs carrier boards equippped with MIPI-CSI interface (FPC30 connector)
• Built-in clock source
• Built-in SL1 PMIC (developed by SoMLabs)
• Connection with carrier board using FPC30 cable

Pictures

Ordering info

SL-MIPI-CSI-OV5640 - FPC 30-pin flat cable (A-A) is included.

Operating ranges

Parameter	Value	Unit	Comment
Power Supply	3.3	V	Powered from carrier board
Current	0.16	A	Maximum peak value
Environment temperature	-30…+70	oC	-

Electrical parameters

Signal name	Parameter	Value			Units
		Min.	Typ.	Max.
+3.3V	Supply Voltage	3.2	3.3	3.35	V
I3.3V	Supply Current (3.3V)	1	2.2	8	mA
VIORES/SPDIF	RES/SPDIF Input Voltage	0	3.3	3.6	V
fI2C	I2C Controller Speed	-	-	400	kHz
RINT	Interrupt Output Pull-up Resistance	-	4.7	-	kΩ
RI2C	I2C IOs Pull-up Resistance	-	4.7	-	kΩ

MIPI-CSI (output) Pinout

FPC30 connector pin	Function name	Description
1	GND	-
2	-	-

Dimensions