Difference between revisions of "Installing OpenSTLinux on VisionSOM-STM32MP1 with SD card"
From SomLabs Wiki
(Created page with "{{PageHeader|Installing OpenSTLinux on VisionSOM-STM32MP1 with SD card}} The built system image file can be written to the SD card using the following command: <pre> sudo dd...") |
(No difference)
|
Revision as of 17:33, 20 November 2020
Installing OpenSTLinux on VisionSOM-STM32MP1 with SD card
The built system image file can be written to the SD card using the following command:
sudo dd if=<image .raw file> of=/dev/sdX bs=1M
In order to run the images from SD card the main board jumpers shall be set as follows (BOOT[0:2] = 101):
