Difference between revisions of "SL-ADP-PCIe-M2 Datasheet and Pinout"
From SomLabs Wiki
(→Features) |
(→Features) |
||
(19 intermediate revisions by the same user not shown) | |||
Line 4: | Line 4: | ||
[[File:SL-ADP-PCIe-M2-ssd.png|800px|center]] | [[File:SL-ADP-PCIe-M2-ssd.png|800px|center]] | ||
<br> | <br> | ||
− | SL-ADP-PCIe-M2 is adapter dedicated to using M.2 mass storage (SSD) in embedded systems based on i.MX8Mmini. | + | SL-ADP-PCIe-M2 is adapter dedicated to using M.2 mass storage (SSD, single lane) in embedded systems based on i.MX8Mmini MPU. The SL-ADP-PCIe-M2 module is equipped with M.2 key M connector and is compatible with 2242, 2260 or 2280 modules.<br>The SL-ADP-PCIe-M2 module is equipped with FPC16 connector - the same like in SoMLabs carrier board VisionCB-8M-STD. |
− | The SL-ADP-PCIe-M2 module is equipped with FPC16 connector - the same like in SoMLabs carrier board VisionCB-8M-STD. | ||
== Features == | == Features == | ||
* Equipped with M.2 key M SSD socket | * Equipped with M.2 key M SSD socket | ||
* Single rail +3.3V power supply | * Single rail +3.3V power supply | ||
− | * | + | * Single lane PCIe communication interface |
* Operating temperature -30÷+85°C | * Operating temperature -30÷+85°C | ||
* Fully compatible with SoMLabs carrier boards equippped with PCIe interface on FPC16 connector | * Fully compatible with SoMLabs carrier boards equippped with PCIe interface on FPC16 connector | ||
Line 72: | Line 71: | ||
| I<sub>3.3V</sub> | | I<sub>3.3V</sub> | ||
| Supply Current (3.3V) | | Supply Current (3.3V) | ||
− | | | + | | 1 |
− | |||
| - | | - | ||
+ | | 15 | ||
| mA | | mA | ||
|- | |- | ||
− | + | | f<sub>SUSCLK</sub> | |
− | + | | Suspend mode CLK frequency | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | | f<sub> | ||
− | | | ||
| - | | - | ||
+ | | 32 | ||
| - | | - | ||
− | |||
| kHz | | kHz | ||
|- | |- | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|} | |} | ||
+ | <br>Note: | ||
+ | <br>1. Current consumption value without SSD module. | ||
− | == | + | == PCIe Pinout == |
<br> | <br> | ||
− | [[File:SL- | + | [[File:SL-ADP-PCIe-M2-conn.jpg|center]] |
<br /> | <br /> | ||
<br> | <br> | ||
{| class="wikitable" | {| class="wikitable" | ||
− | ! style="text-align: center; font-weight: bold;" | | + | ! style="text-align: center; font-weight: bold;" | FPC16 connector pin |
! style="text-align: center; font-weight: bold;" | Function name | ! style="text-align: center; font-weight: bold;" | Function name | ||
! style="text-align: center; font-weight: bold;" | Description | ! style="text-align: center; font-weight: bold;" | Description | ||
|- | |- | ||
| 1 | | 1 | ||
− | | | + | | - |
| - | | - | ||
|- | |- | ||
Line 133: | Line 106: | ||
|- | |- | ||
| 3 | | 3 | ||
− | | | + | | +3.3V |
− | | | + | | Power supply |
|- | |- | ||
| 4 | | 4 | ||
− | | | + | | +3.3V |
− | | | + | | Power supply |
|- | |- | ||
| 5 | | 5 | ||
Line 145: | Line 118: | ||
|- | |- | ||
| 6 | | 6 | ||
− | | | + | | - |
− | | | + | | - |
|- | |- | ||
| 7 | | 7 | ||
− | | | + | | GND |
− | | | + | | - |
|- | |- | ||
| 8 | | 8 | ||
− | | | + | | PCIe_CLK_n |
− | | | + | | Negative CLK data lane |
|- | |- | ||
| 9 | | 9 | ||
− | | | + | | PCIe_CLK_p |
− | | | + | | Positive CLK data lane |
|- | |- | ||
| 10 | | 10 | ||
− | | | + | | GND |
− | | | + | | - |
|- | |- | ||
| 11 | | 11 | ||
− | | | + | | PCIe_TXN_p |
− | | | + | | Positive TX data lane |
|- | |- | ||
| 12 | | 12 | ||
+ | | PCIe_TXN_n | ||
+ | | Negative TX data lane | ||
+ | |- | ||
+ | | 13 | ||
| GND | | GND | ||
| - | | - | ||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
| 14 | | 14 | ||
− | | | + | | PCIe_RXN_p |
− | | | + | | Positive RX data lane |
|- | |- | ||
| 15 | | 15 | ||
− | | | + | | PCIe_RXN_n |
− | | | + | | Negative RX data lane |
|- | |- | ||
| 16 | | 16 | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| GND | | GND | ||
| - | | - | ||
|- | |- | ||
|} | |} | ||
+ | <br>Note: | ||
+ | <br>1. nPERST, nCLKREQ and nPEWAKE pins are connected to +3.3V with 10k pull-up resistors. | ||
+ | <br>2. 32kHz generator connected to SUSCLK input. | ||
+ | <br>3. ACT LED is controlled by DAS/DSS/nLED1 pin. | ||
== Dimensions == | == Dimensions == | ||
<br> | <br> | ||
− | [[File:SL- | + | [[File:SL-ADP-PCIe-M2-dimension.jpg|center]] |
Latest revision as of 13:28, 4 May 2021
SL-ADP-PCIe-M2 M.2 PCIe mass storage adapter Datasheet and Pinout
Contents
General description
SL-ADP-PCIe-M2 is adapter dedicated to using M.2 mass storage (SSD, single lane) in embedded systems based on i.MX8Mmini MPU. The SL-ADP-PCIe-M2 module is equipped with M.2 key M connector and is compatible with 2242, 2260 or 2280 modules.
The SL-ADP-PCIe-M2 module is equipped with FPC16 connector - the same like in SoMLabs carrier board VisionCB-8M-STD.
Features
- Equipped with M.2 key M SSD socket
- Single rail +3.3V power supply
- Single lane PCIe communication interface
- Operating temperature -30÷+85°C
- Fully compatible with SoMLabs carrier boards equippped with PCIe interface on FPC16 connector
- Built-in 32kHz clock source
- Built-in two LEDs
- Compatible with 2242, 2260 and 2280 modules
- Connection with carrier board using FPC16 cable
Pictures
Note: the SSD module shown in the picture is not included in the SL-ADP-PCIe-M2 kit!
Ordering info
SL-ADP-PCIe-M2 - FPC 16-pin flat cable (A-A) is included. The SSD module is not included in the SL-ADP-PCIe-M2 kit.
Operating ranges
Parameter | Value | Unit | Comment |
---|---|---|---|
Power Supply | |
|
Powered from carrier board |
Current | |
|
Maximum peak value (excluding SSD module) |
Working temperature | oC | - |
Electrical parameters
Signal name | Parameter | Value | Units | ||
---|---|---|---|---|---|
Min. | Typ. | Max. | |||
+3.3V | Supply Voltage | 3.2 | 3.3 | 3.35 | V |
I3.3V | Supply Current (3.3V) | 1 | - | 15 | mA |
fSUSCLK | Suspend mode CLK frequency | - | 32 | - | kHz |
Note:
1. Current consumption value without SSD module.
PCIe Pinout
FPC16 connector pin | Function name | Description |
---|---|---|
1 | - | - |
2 | - | - |
3 | +3.3V | Power supply |
4 | +3.3V | Power supply |
5 | - | - |
6 | - | - |
7 | GND | - |
8 | PCIe_CLK_n | Negative CLK data lane |
9 | PCIe_CLK_p | Positive CLK data lane |
10 | GND | - |
11 | PCIe_TXN_p | Positive TX data lane |
12 | PCIe_TXN_n | Negative TX data lane |
13 | GND | - |
14 | PCIe_RXN_p | Positive RX data lane |
15 | PCIe_RXN_n | Negative RX data lane |
16 | GND | - |
Note:
1. nPERST, nCLKREQ and nPEWAKE pins are connected to +3.3V with 10k pull-up resistors.
2. 32kHz generator connected to SUSCLK input.
3. ACT LED is controlled by DAS/DSS/nLED1 pin.
Dimensions