Difference between revisions of "StarSBC-6ULL"
From SomLabs Wiki
(6 intermediate revisions by 2 users not shown) | |||
Line 24: | Line 24: | ||
| | | | ||
content=  | content=  | ||
− | *[[ | + | *[[StarSBC-6ULL Datasheet and Pinout|Datasheet and Pinout]] |
__WP_Files(4532) | __WP_Files(4532) | ||
}} {{DocBox|boxwidth=21|system=Howto | }} {{DocBox|boxwidth=21|system=Howto | ||
|content= | |content= | ||
'''Embedded Linux Developer Guide''' | '''Embedded Linux Developer Guide''' | ||
− | * [[ | + | * [[Writing_StarSBC-6ULL_system_image_to_eMMC_memory|Writing system image to eMMC memory]] |
− | |||
− | |||
* [[Extending rootfs partition|Extending rootfs partition]] | * [[Extending rootfs partition|Extending rootfs partition]] | ||
− | * [[Connecting to WiFi network using systemd and wpa-supplicant|Connecting to WiFi network on | + | * [[Connecting to WiFi network using systemd and wpa-supplicant|Connecting to WiFi network]] |
− | * [[ | + | * [[StarSBC-6ULL_CAN_bus_example|Using CAN bus on StarSBC-6ULL]] |
+ | * [[StarSBC-6ULL_RS485_example|Using RS485 on StarSBC-6ULL]] | ||
+ | * [[StarSBC-6ULL_RS232_example|Using RS232 on StarSBC-6ULL]] | ||
+ | * [[Setting_MAC_address_on_iMX6ULL|Setting MAC address on iMX6ULL]] | ||
}} {{DocBox|boxwidth=21|system=Yocto | }} {{DocBox|boxwidth=21|system=Yocto | ||
|content= | |content= | ||
'''Yocto Developer Guide''' | '''Yocto Developer Guide''' | ||
− | * [[VisionSOM_imx-meta-somlabs-kirkstone | iMX Yocto Kirkstone meta-layer for | + | * [[VisionSOM_imx-meta-somlabs-mickledore | iMX Yocto Mickledore meta-layer for StarSBC-6ULL by SoMLabs]] |
− | * [[VisionSOM_imx-meta-somlabs-honister | iMX Yocto Honister meta-layer for | + | * [[VisionSOM_imx-meta-somlabs-kirkstone | iMX Yocto Kirkstone meta-layer for StarSBC-6ULL by SoMLabs]] |
− | * [[VisionSOM_imx-meta-somlabs-hardknott | iMX Yocto Hardknott meta-layer for | + | * [[VisionSOM_imx-meta-somlabs-honister | iMX Yocto Honister meta-layer for StarSBC-6ULL by SoMLabs]] |
+ | * [[VisionSOM_imx-meta-somlabs-hardknott | iMX Yocto Hardknott meta-layer for StarSBC-6ULL by SoMLabs]] | ||
}} | }} | ||
}} | }} |
Latest revision as of 18:12, 27 November 2023
Documentation
How to
Specifications |
CPU | NXP i.MX6ULL Cortex-A7 32-bit processor (CPU clock up to 900MHz) |
Memory | up to 1GB DDR3L |
Storage | up to 32GB eMMC |
Network | Wi-Fi 802.11b/g/n, Bluetooth BLE 1 x Ethernet: 10/100 (single PHY10/100 on-board) |
RTC | built-in with external battery |
I2C | up to 4 channels |
SPI | up to 4 channels |
CAN | up to 2 FlexCAN |
UART | up to 8 channels |
USB | 2 x USB2.0 OTG Host/Device |
Audio | Stereo MQS |
Security | AES-128, ARM TrustZone, RNG |
Temperature Range | 0 to 70°C, -30 to +70°C (with WiFi/BLE module), -40 to +85°C |
Dimensions | 46mm x 60mm x 17mm module equipped with 2x26 pin 2,54 mm connectors |