Personal tools

Difference between revisions of "VisionCB-6ULL-STD"

From SomLabs Wiki

Jump to: navigation, search
 
(8 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
{{Product|category1=SOM|category2=|image=VisionCB-STD-1-4-1k.png
 
{{Product|category1=SOM|category2=|image=VisionCB-STD-1-4-1k.png
|cpu=VisionSOM-6UL - System on Module with NXP i.MX6UL application procesor<br>or<br>VisionSOM-6ULL - System on Module with NXP i.MX6ULL application procesor
+
|cb_som_compatibility=VisionSOM-6UL and VisionSOM-6ULL module with NXP i.MX6ULL processor
|ram=up to 512MB DDR3L <br>(depends on used VisionSOM)
+
|cb_som_socket=SODIMM200
|storage=uSD card <br>or up to 32GB eMMC <br>or up to 512MB NAND Flash<br>(depends on used VisionSOM)
+
|cb_display_connector=24-bit RGB parallel interface (FPC50)
|camera=up to 24-bit CSI interface
+
|cb_network=1x Ethernet 10/100Mbit/s, RJ45
|display=24-bit RGB parallel interface
+
|cb_usb=USB 2.0 host x1, USB-OTG 2.0 x1
|net=1x Ethernet 10/100Mbit/s, RJ45<br>Wi-Fi 802.11b/g/n<br>(depends on used VisionSOM)
+
|cb_debugger=JTAG connector for external debugger
|bluetooth=Bluetooth: 4.1/BLE backward compatible to 2.x+EDR and 3.0<br>(depends on used VisionSOM)
+
|cb_console_interface=USB/UART
 +
|cb_switches=4+1 (reset)
 +
|cb_leds=4 + 1 (power)
 +
|cb_connectors=Raspberry Pi compatible (40 pins, 2,54mm), Arduino Rev3
 +
|cb_rtc_backup=none
 +
|cb_power_supply=External 9-12V DC
 
|temp= 0 to +70°C
 
|temp= 0 to +70°C
|usb=2x USB2.0 OTG Host/Device
 
 
|dim=130mm x 90mm x 17mm
 
|dim=130mm x 90mm x 17mm
 
|description=VisionCB-6ULL-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>
 
|description=VisionCB-6ULL-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.<br>
Line 16: Line 20:
 
|
 
|
 
content=&#32;
 
content=&#32;
*[[VisionCB-6ULL-STD Datasheet and Pinout|VisionCB-6ULL-STD v2.0 Datasheet and Pinout]]
+
*[[VisionCB-6ULL-STD Datasheet and Pinout|VisionCB-6ULL-STD v.2.0 Datasheet and Pinout]]
 
__WP_Files(1425)
 
__WP_Files(1425)
 +
}}{{DocBox|boxwidth=21|system=Howto
 +
|
 +
content=&#32;
 +
*[[VisionCB-STD Power Supply|VisionCB-STD Power Supply]]
 +
*[[VisionSOM-6ULL - USB recovery mode|VisionSOM-6ULL - USB recovery mode]]
 
}}  
 
}}  
 
}}
 
}}

Latest revision as of 10:53, 7 April 2020

VisionCB-6ULL-STD
VisionCB-6ULL-STD VisionCB-6ULL-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
Specifications
SOM compatibilityVisionSOM-6UL and VisionSOM-6ULL module with NXP i.MX6ULL processor
SOM socketSODIMM200
Display connector24-bit RGB parallel interface (FPC50)
Network1x Ethernet 10/100Mbit/s, RJ45
USBUSB 2.0 host x1, USB-OTG 2.0 x1
DebuggerJTAG connector for external debugger
Console interfaceUSB/UART
Switches4+1 (reset)
LEDs4 + 1 (power)
ConnectorsRaspberry Pi compatible (40 pins, 2,54mm), Arduino Rev3
RTC Backupnone
Power supplyExternal 9-12V DC
Temperature Range0 to +70°C
Dimensions130mm x 90mm x 17mm
NXP Partner ST Partner