Personal tools


From SomLabs Wiki

Jump to: navigation, search
VisionCB-6ULL-STD VisionCB-6ULL-STD is a carrier board for the VisionSOM family of computer-on-modules which are powered by NXP i.MX 6UL or i.MX 6ULL application processors (ARM Cortex-A7). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.
SOM compatibilityVisionSOM-6UL and VisionSOM-6ULL module with NXP i.MX6ULL processor
SOM socketSODIMM200
Display connector24-bit RGB parallel interface (FPC50)
Network1x Ethernet 10/100Mbit/s, RJ45
USBUSB 2.0 host x1 USB-OTG 2.0 x1
DebuggerJTAG connector for external debugger
Console interfaceUSB/UART
Switches4+1 (reset)
LEDs4 + 1 (power)
ConnectorsRaspberry Pi compatible (40 pins, 2,54mm), Aruduiono Rev3
RTC Backupnone
Power supplyExternal 9-12V DC
Temperature Range0 to +70°C
Dimensions130mm x 90mm x 17mm
NXP Partner ST Partner Renesas Partner