Personal tools

VisionCB-STD Power Supply

From SomLabs Wiki

Revision as of 19:23, 31 October 2017 by Admin (talk | contribs) (Created page with "{{PageHeader|VisionCB-STD Power Supply}} There are two ways to provide power supply to VisionCB-STD: * through 9-12VDC connector (2.1x5.5 Barrel Jack, Center-Positive). We rec...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

VisionCB-STD Power Supply


There are two ways to provide power supply to VisionCB-STD:

  • through 9-12VDC connector (2.1x5.5 Barrel Jack, Center-Positive). We recommend to use 12V/2A power supplies.
  • through micro-USB connector (PWR-C). Standard PC USB port provides 5V/500mA, it will be enough to supply basic configuration (VisionSOM-6ULL + VisionCB-STD). If you want to connect additional equipment (USB Hard Drives, Display etc.) you may need to either connect additional power supply through 9-12VDC or connect PWR-C to power supply with micro-USB plug (in this case you will not be able to access VisionCB-STF USB-UART converter).
VisionCB-STD power supply options
NXP Partner ST Partner