Personal tools

Difference between revisions of "VisionCB-STM32MP1-STD Datasheet and Pinout"

From SomLabs Wiki

Jump to: navigation, search
(→‎Boot Selector)
(→‎Raspberry Pi compatible I/O header (J504))
Line 155: Line 155:
 
1. By default lines BOOT3...BOOT0 are pulled-down with 1k resistors
 
1. By default lines BOOT3...BOOT0 are pulled-down with 1k resistors
  
−
== Raspberry Pi compatible I/O header (J504) ==
+
== Raspberry Pi compatible I/O header ==
−
[[File:VisionCB-2-0-rpi.png|center|600px]]
+
[[File:VisionCB-STM32MP1-STD-v11_rpi.png|center|700px]]
−
 
 
  
  
 +
<center>
 
{| class="wikitable"
 
{| class="wikitable"
−
! style="text-align: center; font-weight: bold;" | J504 Pin
+
! style="text-align: center; font-weight: bold;" | Pin
 
! style="text-align: center; font-weight: bold;" | Default function name
 
! style="text-align: center; font-weight: bold;" | Default function name
 
! style="text-align: center; font-weight: bold;" | Description
 
! style="text-align: center; font-weight: bold;" | Description
 +
 
|-
 
|-
−
| 1
+
| 1 || +3.3V || +3.3V generated by DC/DC built-in SOM (limited current load)
−
| VCC-3V3
 
−
| +3.3V generated by internal SOM LDO converter (limited load current).
 
 
|-
 
|-
−
| 2
+
| 2 || +5V || +5V generated by carrier board built-in DC/DC converter
−
| VCC-5V0
 
−
| +5V generated by carrier board built-in DC/DC converter.
 
 
|-
 
|-
−
| 3
+
| 3 || DSI-I2C-SDA || I2C4 SDA line
−
| UART5-RXD
 
−
| Default: UART5 RxD input or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 4
+
| 4 || +5V || +5V generated by carrier board built-in DC/DC converter
−
| VCC-5V0
 
−
| +5V generated by carrier board built-in DC/DC converter.
 
 
|-
 
|-
−
| 5
+
| 5 || DSI-I2C-SDA || I2C4 SCL line
−
| UART5-TXD
 
−
| Default: UART5 TxD output or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 6
+
| 6 || GND || -
−
| GND
 
−
| -
 
 
|-
 
|-
−
| 7
+
| 7 || UART8-CTS || Default: UART8 CTS line or universal GPIO with 3.3V logic levels
−
| ENET2_TXD0
 
−
| Default: ENET2 TXD0 line or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 8
+
| 8 || UART3-TXD || Default: UART3 TXD line or universal GPIO with 3.3V logic levels
−
| UART4-TXD
 
−
| Default: UART4 TXD output or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 9
+
| 9 || GND || -
−
| GND
 
−
| -
 
 
|-
 
|-
−
| 10
+
| 10 || UART3-RXD || Default: UART3 RXD line or universal GPIO with 3.3V logic levels
−
| UART4-RXD
 
−
| Default: UART4 RXD input or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 11
+
| 11 || UART8-RTS || Default: UART8 RTS line or universal GPIO with 3.3V logic levels
−
| ENET2_CRS_DV
 
−
| Default: ENET2 CRS_DV line or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 12
+
| 12 || GPIO-PD12 || Shared with switch S100/10k pullup
−
| GPIO5
 
−
| Universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 13
+
| 13 || - || -
−
| UART1-CTS
 
−
| Default: UART1 CTS line or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 14
+
| 14 || GND || -
−
| GND
 
−
| -
 
 
|-
 
|-
−
| 15
+
| 15 || - || -
−
| UART1-RTS
 
−
| Default: UART1 RTS line or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 16
+
| 16 || GPIO-PD11 || Shared with switch S101/10k pullup
−
| GPIO8
 
−
| Universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 17
+
| 17 || +3.3V || +3.3V generated by DC/DC built-in SOM (limited current load)
−
| VCC-3V3
 
−
| +3.3V generated by internal SOM LDO converter (limited load current)
 
 
|-
 
|-
−
| 18
+
| 18 || GPIO-PG12 || Shared with user LED (D102, yellow)<br>LED is buffered by logic inverter
−
| GPIO9
 
−
| Universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 19
+
| 19 || LCD-R6 (DATA22) || PA8 GPIO line<br>SPI3 MOSI
−
| UART2-CTS
 
−
| Default: UART2 CTS line or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 20
+
| 20 || GND || -
−
| GND
 
−
| -
 
 
|-
 
|-
−
| 21
+
| 21 || LCD-B3 (DATA3) || PD10 GPIO line<br>SPI3 MISO
−
| UART2-RTS
 
−
| Default: UART2 RTS line or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 22
+
| 22 || GPIO-PA12 || Shared with user LED (D100, green)<br>LED is buffered by logic inverter
−
| GPIO0
 
−
| Universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 23
+
| 23 || LCD-R2 (DATA18) || PC10 GPIO line<br>SPI3 SCK
−
| UART2-RXD
 
−
| Default: UART2 RXD input or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 24
+
| 24 || GPIO-PA11 || Shared with user LED (D101, red)<br>LED is buffered by logic inverter
−
| UART2-TXD
 
−
| Default: UART2 TXD input or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 25
+
| 25 || GND || -
−
| GND
 
−
| -
 
 
|-
 
|-
−
| 26
+
| 26 || USART6-RXD || Default: UART6 RXD line or universal GPIO with 3.3V logic levels
−
| ENET2_TXEN
 
−
| Default: ENET2 TXEN line or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 27
+
| 27 || - || -
−
| -
 
−
| -
 
 
|-
 
|-
−
| 28
+
| 28 || - || -
−
| -
 
−
| -
 
 
|-
 
|-
−
| 29
+
| 29 || DSI-BL-PWM || PD15 GPIO line<br>TIM4 CH4 PWM output
−
| ENET2_TX_CLK
 
−
| Default: ENET2 TX_CLK line or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 30
+
| 30 || GND || -
−
| GND
 
−
| -
 
 
|-
 
|-
−
| 31
+
| 31 || GPIO-PB1-ADC1-5 || Universal GPIO line with 3.3V logic levels or ADC input
−
| ENET2_RXER
 
−
| Default: ENET2 RXER line or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 32
+
| 32 || USART6-TXD || Default: UART6 TXD line or universal GPIO with 3.3V logic levels
−
| JTAG-MOD
 
−
| Default: JTAG MOD input or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 33
+
| 33 || GPIO-PC0-ADC1-10 || Universal GPIO line with 3.3V logic levels or ADC input
−
| UART3-CTS
 
−
| Default: UART3 CTS line or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 34
+
| 34 || GND || -
−
| GND
 
−
| -
 
 
|-
 
|-
−
| 35
+
| 35 || GPIO-PC3-ADC1-13 || Universal GPIO line with 3.3V logic levels or ADC input
−
| UART3-RTS
 
−
| Default: UART3 RTS line or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 36
+
| 36 || GPIO-PA13 || Shared with PHY Ethernet controller interrupt line
−
| JTAG-TDO
 
−
| Default: JTAG TDO output or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 37
+
| 37 || GPIO-PA0-ADC1-16 || Universal GPIO line with 3.3V logic levels or ADC input
−
| ENET2_RXD1
 
−
| Default: ENET2 RXD1 line or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 38
+
| 38 || GPIO-PB6 || Universal GPIO with 3.3V logic levels
−
| JTAG-TDI
 
−
| Default: JTAG TDI input or universal GPIO with 3.3V logic levels.
 
 
|-
 
|-
−
| 39
+
| 39 || GND || -
−
| GND
 
−
| -
 
 
|-
 
|-
−
| 40
+
| 40 || GPIO-PF10 || Universal GPIO with 3.3V logic levels
−
| JTAG-TMS
 
−
| Default: JTAG TMS output or universal GPIO with 3.3V logic levels.
 
 
|}
 
|}
 +
</center>
  
 
== Arduino compatible I/O headers (J500-J503) ==
 
== Arduino compatible I/O headers (J500-J503) ==

Revision as of 11:38, 7 April 2020

VisionCB-STM32MP1-STD v.1.1 Datasheet and Pinout

General description

VisionCB-STM32MP1-STD-v10.png

is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics STM32MP15x application processors (single or dual core ARM Cortex-A7 + internal microcontroller Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as debugger, USB, Ethernet, UART, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product.

The carrier board connects with the SoM via a standard SODIMM200 connector.


Applications

  • Industrial embedded Linux computer
  • Home Appliances
  • Home Automation – Smart Home
  • Human-machine Interfaces (HMI)
  • Point-of-sales (POS) terminals
  • Cash Register
  • 2D barcode scanners and printers
  • Smart grid Infrastructure
  • IoT gateways
  • Residential getaways
  • Machine vision equipment
  • Robotics
  • Fitness/outdoor equipment


Features

  • Carrier Board (Base Board) compatible with the VisionSOM-STM32MP1 family of modules based on STMicroelectronics STM32MP15x application processors
  • SoM Interface: SODIMM200
  • Expansion Connectors:
    • Raspberry Pi compatible connectors 2x20 Pin Header (Male)
    • Universal 2x20 Pin Header (Male)
    • MicroSD card socket
  • Communication Connectors:
    • 1x Ethernet 10/100Mbit/s, RJ45
    • 1x USB Host Type A connectors
    • 1x USB OTG Micro AB connector
    • 1x Console MicroUSB B connector
  • Display Interface:
    • 50-pin FFC/FPC Parallel RGB – 24-bit
    • 30-pin FFC/FPC MIPI-DSI
  • User Interface:
    • 3 Pushbuttons
    • 5 LEDs
  • Boot selector
    • External Power Supply 9-12V DC
    • Temperature Range: 0 to +70°C
  • Board Size: 160mm x 100mm x 17mm

Pictures of VisionCB-STM32MP1-STD v1.1 board

Version Photo
VisionCB-STM32MP1-STD v1.1 board only
VisionCB-STM32MP1-STD-v10.png

Ordering info

VisionCB-STM32MP1-STD v1.1

Block Diagram

VisionCB-STM32MP1-STD-v11 block.png

Electrical parameters

Parameter Value Units Comment
Min. Typ. Max.
Power Supply 9.0 11.0 12.0 V Positive pole on central connector of J102
Supply current - - 0.15 A Excluding LCD, USB and antoher external loads
LCD Power Supply 3.25 3.4 3.5 V Optionally 5V
MicroSD Card Power Supply 3.15 3.3 3.45 V -
GPIO voltage 3.3 V -

Boot Selector

VisionCB-STM32MP1-STD-v11 boot.png
BOOTx Boot Mode Description
BOOT2 BOOT1 BOOT0
0 0 0 UART and USB Wait incoming connection on:
- USART2/3/6 and UART4/5/7/8 on default pins
- USB high-speed device
0 0 1 Serial NOR Flash Not used on VisionSOM-STM32MP1
0 1 0 eMMC eMMC on SDMMC2
0 1 1 NAND Flash Not used on VisionSOM-STM32MP1
1 0 0 - Not used on VisionSOM-STM32MP1
1 0 1 SD card SD card on SDMMC1
1 1 0 UART and USB Wait incoming connection on:
- USART2/3/6 and UART4/5/7/8 on default pins
- USB high-speed device on OTG_HS_DP/DM pins
1 1 1 Serial NAND Flash Not used on VisionSOM-STM32MP1

1. By default lines BOOT3...BOOT0 are pulled-down with 1k resistors

Raspberry Pi compatible I/O header

VisionCB-STM32MP1-STD-v11 rpi.png


Pin Default function name Description
1 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
2 +5V +5V generated by carrier board built-in DC/DC converter
3 DSI-I2C-SDA I2C4 SDA line
4 +5V +5V generated by carrier board built-in DC/DC converter
5 DSI-I2C-SDA I2C4 SCL line
6 GND -
7 UART8-CTS Default: UART8 CTS line or universal GPIO with 3.3V logic levels
8 UART3-TXD Default: UART3 TXD line or universal GPIO with 3.3V logic levels
9 GND -
10 UART3-RXD Default: UART3 RXD line or universal GPIO with 3.3V logic levels
11 UART8-RTS Default: UART8 RTS line or universal GPIO with 3.3V logic levels
12 GPIO-PD12 Shared with switch S100/10k pullup
13 - -
14 GND -
15 - -
16 GPIO-PD11 Shared with switch S101/10k pullup
17 +3.3V +3.3V generated by DC/DC built-in SOM (limited current load)
18 GPIO-PG12 Shared with user LED (D102, yellow)
LED is buffered by logic inverter
19 LCD-R6 (DATA22) PA8 GPIO line
SPI3 MOSI
20 GND -
21 LCD-B3 (DATA3) PD10 GPIO line
SPI3 MISO
22 GPIO-PA12 Shared with user LED (D100, green)
LED is buffered by logic inverter
23 LCD-R2 (DATA18) PC10 GPIO line
SPI3 SCK
24 GPIO-PA11 Shared with user LED (D101, red)
LED is buffered by logic inverter
25 GND -
26 USART6-RXD Default: UART6 RXD line or universal GPIO with 3.3V logic levels
27 - -
28 - -
29 DSI-BL-PWM PD15 GPIO line
TIM4 CH4 PWM output
30 GND -
31 GPIO-PB1-ADC1-5 Universal GPIO line with 3.3V logic levels or ADC input
32 USART6-TXD Default: UART6 TXD line or universal GPIO with 3.3V logic levels
33 GPIO-PC0-ADC1-10 Universal GPIO line with 3.3V logic levels or ADC input
34 GND -
35 GPIO-PC3-ADC1-13 Universal GPIO line with 3.3V logic levels or ADC input
36 GPIO-PA13 Shared with PHY Ethernet controller interrupt line
37 GPIO-PA0-ADC1-16 Universal GPIO line with 3.3V logic levels or ADC input
38 GPIO-PB6 Universal GPIO with 3.3V logic levels
39 GND -
40 GPIO-PF10 Universal GPIO with 3.3V logic levels

Arduino compatible I/O headers (J500-J503)

VisionCB-2-0-arduino.png


Pin Arduino name Default function name Description
Power connector J500, red connector
1 - - -
2 IOREF VCC-3V3 +3.3V generated by internal SOM LDO converter (limited load current).
3 RESET POR-B External warm reset input, active L.
4 3.3V VCC-3V3 +3.3V generated by internal SOM LDO converter (limited load current).
5 5V VCC-5V0 +5V generated by carrier board built-in DC/DC converter.
6 GND GND -
7 GND GND -
8 VIN VCC-3V3 +3.3V generated by internal SOM LDO converter (limited load current).
Analog inputs connector J501, blue connector
1 AIN0 GPIO1 Universal GPIO with 3.3V logic levels.
2 AIN1 GPIO5 Universal GPIO with 3.3V logic levels.
3 AIN2 GPIO8 Universal GPIO with 3.3V logic levels.
4 AIN3 GPIO9 Universal GPIO with 3.3V logic levels.
5 - - -
6 - - -
Digital I/Os connector J503, yellow connector
1 DIO0 UART4-RXD Default: UART4 RXD line or universal GPIO with 5V logic levels.
2 DIO1 UART4-TXD Default: UART4 TXD line or universal GPIO with 5V logic levels.
3 DIO2 UART3-RTS Default: UART3 RTS line or universal GPIO with 5V logic levels.
4 DIO3 UART3-CTS Default: UART3 CTS line or universal GPIO with 5V logic levels.
5 DIO4 ENET2_RXER Default: ENET2 RX ER line or universal GPIO with 5V logic levels.
6 DIO5 ENET2_TX_CLK Default: ENET2 TX CLK line or universal GPIO with 5V logic levels.
7 DIO6 UART1-RTS Default: UART1 RTS line or universal GPIO with 5V logic levels.
8 DIO7 UART1-CTS Default: UART1 CTS line or universal GPIO with 5V logic levels.
Digital I/Os connector J502, yellow connector
1 DIO8 ENET2_TXD0 Default: ENET2 TXD0 line or universal GPIO with 5V logic levels.
2 DIO9 ENET2_CRS_DV Default: ENET2 CRS DV line or universal GPIO with 5V logic levels.
3 DIO10 UART2-TXD Default: UART2 TXD line or universal GPIO with 5V logic levels.
4 DIO11 UART2-CTS Default: UART2 CTS line or universal GPIO with 5V logic levels.
5 DIO12 UART2-RTS Default: UART2 RTS line or universal GPIO with 5V logic levels.
6 DIO13 UART2-RXD Default: UART2 RXD line or universal GPIO with 5V logic levels.
7 GND GND -
8 AREF VCC-3V3 +3.3V generated by internal SOM LDO converter (limited load current).
9 DIO14-SCL UART5-RXD Default: UART5 RXD line or universal GPIO with 5V logic levels.
10 DIO15-SDA UART5-TXD Default: UART5 TXD line or universal GPIO with 5V logic levels.

Notes:
1. All I/O lines are 5V compatible.
2. RESET line is 5V compatible.
3. Preferred voltage range on AIN0…AIN3 lines is 0…+3.3V.
4. Voltage level compatibility can be changed using jumper selector (V-ARD), but voltage range on AIN0…AIN3 lines must be 0…+3.3V.

User LEDs connections

VisionCB-2-0-led.png


LED PCB symbol GPIO Description
D400/blue GPIO10 GPIO1_10 Default: JTAG MOD input or universal GPIO with 3.3V logic levels.
D401/green GPIO11 GPIO1_11 Default: JTAG TMS input or universal GPIO with 3.3V logic levels.
D403/yellow GPIO12 GPIO1_12 Default: JTAG TDO input or universal GPIO with 3.3V logic levels.
D402/red GPIO13 GPIO1_13 Default: JTAG TDI input or universal GPIO with 3.3V logic levels.

Notes:
1. LEDs are switched on by logic „1” set at the GPIO outputs.
2. LEDs are controlled by current drivers and do not load the GPIOs.

User switches connections

VisionCB-2-0-switche.png


Switch PCB symbol GPIO Description
S402 GPIO3 GPIO1_IO03 Universal GPIO with 3.3V logic levels.
S403 GPIO4 GPIO1_IO04 Universal GPIO with 3.3V logic levels.
S404 GPIO8 GPIO1_IO08 Universal GPIO with 3.3V logic levels.
S405 GPIO9 GPIO1_IO09 Universal GPIO with 3.3V logic levels.

Notes:
1. After button pressing on GPIO lines are set to „0”.
2. GPIO lines connected to switches are separated from board’s environment by 1k resistors.

TFT LCD connector (RGB 24b, J405)

VisionCB-2-0-lcd.png


J405 pin Default function name LCD interface name
1 LCD-DATA0 LCD-B0
2 LCD-DATA1 LCD-B1
3 LCD-DATA2 LCD-B2
4 LCD-DATA3 LCD-B3
5 LCD-DATA4 LCD-B4
6 LCD-DATA5 LCD-B5
7 LCD-DATA6 LCD-B6
8 LCD-DATA7 LCD-B7
9 GND GND
10 LCD-DATA8 LCD-G0
11 LCD-DATA9 LCD-G1
12 LCD-DATA10 LCD-G2
13 LCD-DATA11 LCD-G3
14 LCD-DATA12 LCD-G4
15 LCD-DATA13 LCD-G5
16 LCD-DATA14 LCD-G6
17 LCD-DATA15 LCD-G7
18 GND GND
19 LCD-DATA16 LCD-R0
20 LCD-DATA17 LCD-R1
21 LCD-DATA18 LCD-R2
22 LCD-DATA19 LCD-R3
23 LCD-DATA20 LCD-R4
24 LCD-DATA21 LCD-R5
25 LCD-DATA22 LCD-R6
26 LCD-DATA23 LCD-R7
27 GND GND
28 LCD-DE DE
29 LCD-HSYNC HSYNC
30 LCD-VSYNC VSYNC
31 GND GND
32 LCD-PCLK DCLK
33 GND GND
34 GPIO4 TS-YPUL
35 GPIO3 TS-YNUR
36 GPIO2 TS-YPLL
37 GPIO1 TS-YNLR
38 - -
39 - -
40 - -
41 - -
42 UART5-TXD I2C-SCL
43 UART5-RXD I2C-SDA
44 GND GND
45 VCC-LCD +3.3V (controlled by ENET2_TXEN)
46 VCC-LCD +3.3V (controlled by ENET2_TXEN)
47 VCC-5V0 +5.0V
48 VCC-5V0 +5.0V
49 LCD-RESET RESET
50 JTAG-nTRST PWREN

Dimensions

VisionCB-STD-2-0-PCB-size.png
Retrieved from "https://wiki.somlabs.com/index.php?title=VisionCB-STM32MP1-STD_Datasheet_and_Pinout&oldid=1826"
NXP Partner ST Partner Renesas Partner