StarSOM-6ULL

StarSOM-6ULL

StarSOM-6ULL is comprised of a small processor module with CPU bus accessibility and standard I/O functionality and is an ideal solution for embedded projects. StarSOM-6ULL can often trim 8-12 months from design cycle and can be easy adapted to existing projects or can be used together with a dedicated carrier board. Customers who are looking for a complete solution can use a set comprised of System on Module (SoM) and Carrier Board (CB). StarSOM-6ULL requires a matching customer’s board or a carrier board to establish a complete system. Carrier Board together with StarSOM-6ULL is ready to use computer on board and is giving enormous flexibility in building projects.

Documentation

• Datasheet and Pinout
• StarSOM-6ULL Datasheet
• Default pin configuration (MEX file)
• StarSOM-6ULL - Altium designer PCB/SCH library with 3D SoM and connector models (7/2024)
• StarSOM-6ULL - Altium designer PCB/SCH library with 3D SoM and connector models (12/2021)
• StarSOM-6ULL - STEP
• I.MX6ULL - Fact Sheet
• EM Radiation Test Precompliance Report (EMC)

How to

Embedded Linux Developer Guide

• Writing system image to SD card
• Writing system image to eMMC memory
• Saving OS image file from eMMC memory
• Extending rootfs partition
• Connecting to WiFi network on VisionSOM-6ULL Yocto
• Customizing the Linux kernel
• Customizing the device tree
• Building simple C program
• Changing the boot splash image

Yocto

Yocto Developer Guide

• iMX Yocto Honister meta-layer for StarSOM-6ULL by SoMLabs
• iMX Yocto Hardknott meta-layer for StarSOM-6ULL by SoMLabs

Specifications

CPU	NXP i.MX6ULL Cortex-A7 32-bit processor (CPU clock up to 900MHz)
Memory	up to 1GB DDR3L
GPU	NXP PXP v2.0 2D graphics accelerator for LCD-TFT
Display	24-bit RGB parallel interface
Camera	up to 24-bit CSI interface
Storage	up to 32GB eMMC
Network	Wi-Fi 802.11b/g/n, Bluetooth BLE 2 x Ethernet: 10/100 (single PHY10/100 on-board)
RTC	built-in with external battery
I2C	up to 4 channels
SPI	up to 4 channels
CAN	up to 2 FlexCAN
UART	up to 8 channels
USB	2 x USB2.0 OTG Host/Device
Audio	3 x I2S/SAI, S/PDIF Tx/Rx, ESAI, Medium Quality audio System
Security	AES-128, ARM TrustZone, RNG
Temperature Range	0 to 70°C, -30 to +70°C (with WiFi/BLE module), -40 to +85°C
Dimensions	40mm x 44mm x 4mm module equipped with 2x100 pin board-to-board connectors