Difference between revisions of "VisionCB-STM32MP1-STD"
From SomLabs Wiki
(Created page with "{{Product|category1=SOM|category2=|image=VisionCB-STM32MP1-STD-v10.png |cb_som_compatibility=VisionSOM-STM32P1 module with STMicroelectronics STM32MP15x processor |cb_som_sock...") |
|||
| Line 2: | Line 2: | ||
|cb_som_compatibility=VisionSOM-STM32P1 module with STMicroelectronics STM32MP15x processor | |cb_som_compatibility=VisionSOM-STM32P1 module with STMicroelectronics STM32MP15x processor | ||
|cb_som_socket=SODIMM200 | |cb_som_socket=SODIMM200 | ||
| − | |cb_display_connector=24-bit RGB parallel interface (FPC50) | + | |cb_display_connector=24-bit RGB parallel interface (FPC50)<br>1 lane MIPI-DSI interface (FPC30) |
| − | 1 lane MIPI-DSI interface (FPC30) | ||
|cb_network=1x Ethernet 10/100Mbit/s, RJ45 | |cb_network=1x Ethernet 10/100Mbit/s, RJ45 | ||
| − | |cb_usb=USB 2.0 host x1 | + | |cb_usb=USB 2.0 host x1<br>USB-OTH 2.0 x1 |
| − | USB-OTH 2.0 x1 | ||
|cb_debugger=Built-in ST-Link/v2-1 compatible (SWD) | |cb_debugger=Built-in ST-Link/v2-1 compatible (SWD) | ||
|cb_console_interface=USB/UART | |cb_console_interface=USB/UART | ||
|cb_switches=2+1 (reset) | |cb_switches=2+1 (reset) | ||
|cb_leds=3+2 (3.3 and 5V power) | |cb_leds=3+2 (3.3 and 5V power) | ||
| − | |cb_connectors=Raspberry Pi compatible (40 pins, 2,54mm) | + | |cb_connectors=Raspberry Pi compatible (40 pins, 2,54mm)<br>Universal GPIO header (40 pins, 2,54mm)<br>MicroSD socket |
| − | Universal GPIO header (40 pins, 2,54mm) | ||
| − | MicroSD socket | ||
|cb_rtc_backup=Battery CR1220 socket | |cb_rtc_backup=Battery CR1220 socket | ||
|cb_power_supply=External 9-12V DC | |cb_power_supply=External 9-12V DC | ||
| − | |||
|temp= 0 to +70°C | |temp= 0 to +70°C | ||
|dim=160mm x 100mm x 17mm | |dim=160mm x 100mm x 17mm | ||
Revision as of 10:40, 7 April 2020
| VisionCB-STM32MP1-STD |
|
VisionCB-STM32MP1-STD is a carrier board for the VisionSOM-STM32MP1 family of computer-on-modules which are powered by STMicroelectronics SOC (dual core ARM Cortex-M7 + single Cortex-M4). A carrier board, together with a System on Module (SoM), makes a complete development platform similar to SBC. The carrier board houses the most common interfaces such as USB, Ethernet, etc. A large variety of interfaces allows to use it as both a complete development platform or as a stand-alone end-product. |
Documentation
| Specifications |
| SOM compatibility | VisionSOM-STM32P1 module with STMicroelectronics STM32MP15x processor |
| SOM socket | SODIMM200 |
| Display connector | 24-bit RGB parallel interface (FPC50) 1 lane MIPI-DSI interface (FPC30) |
| Network | 1x Ethernet 10/100Mbit/s, RJ45 |
| USB | USB 2.0 host x1 USB-OTH 2.0 x1 |
| Debugger | Built-in ST-Link/v2-1 compatible (SWD) |
| Console interface | USB/UART |
| Switches | 2+1 (reset) |
| LEDs | 3+2 (3.3 and 5V power) |
| Connectors | Raspberry Pi compatible (40 pins, 2,54mm) Universal GPIO header (40 pins, 2,54mm) MicroSD socket |
| RTC Backup | Battery CR1220 socket |
| Power supply | External 9-12V DC |
| Temperature Range | 0 to +70°C |
| Dimensions | 160mm x 100mm x 17mm |
