Personal tools

Difference between revisions of "VisionSOM-RT"

From SomLabs Wiki

Jump to: navigation, search
Line 30: Line 30:
*[[Programming i.MX RT using ZL33PRG|Programming i.MX RT using ZL33PRG]]
*[[Programming i.MX RT using ZL33PRG|Programming i.MX RT using ZL33PRG]]
*[[VisionSOM-RT HMI demo|VisionSOM-RT HMI demo]]
*[[VisionSOM-RT HMI demo|VisionSOM-RT HMI demo]]
*[[Programming eFUSE bits on VisionSOM-RT|Programming eFUSE bits on VisionSOM-RT]]

Latest revision as of 16:24, 29 September 2020

VisionSOM-RT VisionSOM-RT is comprised of a small processor module with CPU bus accessibility and standard I/O functionality and is an ideal solution for embedded projects.
VisionSOM-RT can often trim 8-12 months from design cycle and can be easy adapted to existing projects or can be used together with a dedicated carrier board. Customers who are looking for a complete solution can use a set comprised of System on Module (SoM) and Carrier Board (CB).
VisionSOM-RT requires a matching customer’s board or a carrier board to establish a complete system. Carrier Board together with VisionSOM-RT is ready to use computer on board and is giving enormous flexibility in building projects.
CPUNXP i.MX RT Cortex-M7 32-bit processor (CPU clock up to 600MHz)
Memory512kB on-chip RAM, up to 32MB SDRAM
graphics accelerator for LCD-TFT
Display24-bit RGB parallel interface
Storage4 or 16MB QSPI Flash
I2Cup to 4 channels
SPIup to 4 channels
CANup to 2 FlexCAN
UARTup to 8 channels
Audio3 x I2S/SAI,
Temperature Range-40 to +85°C
Dimensions67mm x 32mm x 4mm
SODIMM200 module
NXP Partner ST Partner