VisionSOM-6ULL
From SomLabs Wiki
| VisionSOM-6ULL |
|
VisionSOM-6ULL is comprised of a small processor module with CPU bus accessibility and standard I/O functionality and is an ideal solution for embedded projects. VisionSOM-6ULL can often trim 8-12 months from design cycle and can be easy adapted to existing projects or can be used together with a dedicated carrier board. Customers who are looking for a complete solution can use a set comprised of System on Module (SoM) and Carrier Board (CB). VisionSOM-6ULL requires a matching customer’s board or a carrier board to establish a complete system. Carrier Board together with VisionSOM-ULL is ready to use computer on board and is giving enormous flexibility in building projects. |
Documentation
- Datasheet and Pinout
- VisionSOM-6UL/ 6ULL Data Brief
- i.MX 6 Fact Sheet
- i.MX 6ULL Fact Sheet
- MEX 5.x file for VisionSOM-6ULL module without WiFi and GPIOs available on edge connector instead of SDIO1
- MEX 5.x file for VisionSOM-6ULL module without WiFi and SDIO1 available on edge connector
- MEX 5.x file for VisionSOM-6ULL module with WiFi on board
- VisionSOM-6ULL DXF File (1 unit = 1 inch)
- VisionSOM-6ULL DWG File (1 unit = 1 inch)
- VisionSOM-6ULL / 6UL PDF 3D files
- VisionSOM-6ULL / 6UL STEP 3D files
- Altium Designer PCB/SCH Integrated Library with 3D SOM and connector models
- ADV7511 driver for VisionSOM-6ULx
- VisionSOM-6ULL Datasheet
- SoMLabs VisionSOM 6ULL Debian 10 Buster (2020-01)
How to
Embedded Linux Developer Guide
- Writing system image to SD card
- Writing system image to eMMC memory
- Connecting to Linux console
- Extending rootfs partition
- Connecting to WiFi network
- Enabling Bluetooth
- Customizing the Linux kernel
- Customizing the device tree
- Building simple C program
- Building simple QT application
- Changing the boot splash image
Debian
Yocto
Yocto Developer Guide
Buildroot
Buildroot Developer Guide
| Specifications |
| CPU | NXP i.MX6ULL Cortex-A7 32-bit processor (CPU clock up to 900MHz) |
| Memory | up to 512MB DDR3L |
| GPU | NXP PXP v2.0 2D graphics accelerator for LCD-TFT |
| Display | 24-bit RGB parallel interface |
| Camera | up to 24-bit CSI interface |
| Storage | uSD card or up to 32GB eMMC or up to 512MB NAND Flash |
| Network | Wi-Fi 802.11b/g/n, Bluetooth BLE 2 x Ethernet: 10/100 (MAC only) |
| RTC | built-in with external battery |
| I2C | up to 4 channels |
| SPI | up to 4 channels |
| CAN | up to 2 FlexCAN |
| UART | up to 8 channels |
| USB | 2 x USB2.0 OTG Host/Device |
| Audio | 3 x I2S/SAI, S/PDIF Tx/Rx, ESAI, Medium Quality audio System |
| Security | AES-128, ARM TrustZone, RNG |
| Temperature Range | -30 to +70°C (with WiFi/BLE module), -40 to +85°C |
| Dimensions | 67mm x 32mm x 4mm SODIMM200 module |
